Peachtree Woodworking Supply Thin Rip Jig, Make Repetitive Narrow Strip Cuts on Your Tabl

Peachtree Woodworking Supply Thin Rip Jig, Make Repetitive Narrow Strip Cuts on Your Tabl

Q: I received this as a gift and find it does not fit in my miter slot. Are there any replacement miter slot "runner" for purchase or does one make one?

It wouldn't be that difficult to make a new bar from either wood or HDPE (like an old cutting board)

Q: Cannot get my jig to tighten down in the miter slot. Slot is 3/4 by 3/8. Saw is a Kobalt K-1015 jig slides in slot no matter. any ideas?

I had this problem and after careful examination of the jig, I determined that the screw on the bottom side of the miter bar was bottoming out before spreading the miter bar sufficiently in the miter groove on my table saw. I was able to easily fix it by adding another washer between the plastic star knob and the upper sliding ruler. Now, it holds the jig firmly and tightly in my Sawstop table saw miter slot. If you decide to try this, just remember to keep the OEM plastic washer lowest in the stack, so it’s the one that contacts the thin-cut slider. It will compress a bit, aiding tightness and will not mar the jig surface.

Q: My Bosch table saw has the miter slot further left than some, how far out does this thin rip extend from the miter slot to saw blade?

It will extend over approximately 6", from center of Chanel to roller. I'm using it on a Ridged portable table saw. I think the smallest rip I did was 1/4". From the center of the channel on my saw to the blade is approximately 6 1/2". Hope these numbers help.

Product ID: 290857151

Secure Transaction

Details

Brand
Peachtree
Color
Chrome
Blade Material
High Speed
Surface Recommendation
Aluminum
Power Source
no power

🎯Accurate repetitive cuts

🔩Adjustable miter slot fit

⚙️Precision aluminum build

Frequently Bought Together

Peachtree Woodworking Supply Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4" x 3/8" Miter Slots •Also Works with Many Router Tables and Band Saws

BOW Products FeatherPRO FP1 - Featherboard for Table Saws, Router Tables and Band Saws - EVA Feathers that Reduce Kickback - Woodworking Tools and Safety Accessories

Milescraft 3406 GrabberPRO - Push block for Table Saws, Router Tables, Band Saws & Jointers

Description

🔪 Cut sharp, cut safe, cut smart with Peachtree’s Thin Rip Jig!

SMOOTH OPERATOR - High-quality free-rotating bearing ensures silky stock feed without resistance.
DUAL JIG STABILITY - Use two jigs for extra control on larger or longer stock—because precision demands support.
EFFORTLESS PRECISION - Set once, cut repeatedly—achieve consistent narrow strips under 2 inches every time.
SAFETY FIRST ALWAYS - Keep your fingers far from the blade with a secure guide roller system.
UNIVERSAL COMPATIBILITY - Fits standard 3/8” x 3/4” miter slots on table saws, router tables, and band saws.

The Peachtree Woodworking Supply Thin Rip Jig is a precision aluminum accessory designed to make repetitive narrow strip cuts (under 2 inches) on table saws safer and more accurate. Featuring an adjustable fit for standard miter slots and a smooth-rolling guide bearing, it acts as a reliable third hand to keep your stock steady and your fingers protected. Ideal for table saws, router tables, and band saws, this jig enhances workflow efficiency and cutting consistency for professional woodworkers and serious hobbyists alike.

Specifications

Manufacturer	Peachtree Woodworking Supply
Part number	3096
Item Weight	567 g
Product Dimensions	10.16 x 7.62 x 7.62 cm; 566.99 g
Item model number	3096
Color	CHROME
Material	Aluminium
Power source type	Corded Electric
Item Package Quantity	1
Handle Material	Aluminum
Blade Length	2 Inches
Special Features	The Thin Rip Jig
Included components	Stand
Batteries Included?	No
Batteries Required?	No

Have a Question? See What Others Asked

I received this as a gift and find it does not fit in my miter slot. Are there any replacement miter slot "runner" for purchase or does one make one?

Cannot get my jig to tighten down in the miter slot. Slot is 3/4 by 3/8. Saw is a Kobalt K-1015 jig slides in slot no matter. any ideas?

My Bosch table saw has the miter slot further left than some, how far out does this thin rip extend from the miter slot to saw blade?

What is the distance from the roller tip to the leading edge of the track guide?

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products