TDPRO Gas Fuel Tank for XR50 CRF50 Pit Dirt Bikes 50cc 70cc 90cc 110cc 125 cc

The picture shows the tank I received mounted on my daughter's 2014 pitster pro 90 ss. I had few issues, nothing serious. The fuel control valve has no english, but what us probably an attempt at universal symbols, which I can make enough sense out if that it's usable. There are intake screens on the intake lines, and a nice bonus is a reserve feature which stock tank did not have. I did clean out plastic burrs a little from when the holes were drilled, and the reserve intake was a little hard to press in but I got it. The valve body sealed down well with the given rubber seal and feels sturdy. Once that was done the tank mounted on the frame using the included front and rear mount gromits and again was solid. The cap fits fine but leaks until you turn it quite far, the scary thing is I don't want to over torque it and breat the neck -which is the thing that broke my old tank, so be aware. The only other mounting issue was the bolts to hold the body plastic on the front sides of the tank were larger than the tank insert threads. I got a 5mm bolt I had on hand and cut it shorter and added a washer to reassemble that part (2x). For the price and no shipping I was pleased with the value and results.

Fits 2021 SSR 125. Replaced stock gas tank because the neck threads broke off. This tank came with petcock installed (no reserve), mounting rubbers and gas cap. Easy to install, tank mounting holes lined up properly, used existing bolts from previous tank, and body installed back on like it should. No leaks so far so i think it's solid. You need to mount the body plastics back on by starting with the back and working your way forward. It will seem like the body holes don't want to line up but they will - mount the back first, sit on bike, and while continuing to sit on bike do your shrouds, and finally the last 2 bolts in front. Yes, it's a cheap tank but it's $29. In a nutshell: It fits, includes the bare necessities and doesn't leak - this is why I'm giving it 5 stars.

Bought this because the filler neck on my sons Baja 49cc broke off. It wasn't an exact fit, but VERY close. I had to cut a very small piece off the back of the tank where the rear screw goes in. Very easy to do. I could have done it with a razor blade. Overall a great replacement.

Crf50 pit bike..

Would have given it zero stars as The first time I filled it up it had a hole in it. All the gas leaked right back out. Not satisfied at all. Looks like I’ll be buying a second tank again after this.

The fuel petcock comes unattached from the tank with hardware. One of the bolts wouldn't thread. I'm going to get another bolt and see if thats the problem. I guess you kind of have to expect issues like this for a $20 Chinese gas tank.

Pretty much matched up perfectly to my Ssr125 stock tank. The fuel petcock was much nicer and easier than the original, I don’t care to have a reserve. The screws were the same thread pattern to put my plastic back on. Overall it was super simple to install and works great.

I put this on a SSR 110. It fits quite well. I did have to dig out some different size screws for mounting the shrouds to the tank but that’s not really a big deal. For the price, it’s great.