WALI Speaker Wall Mounts, Dual Side Clamping Bookshelf Mounting Bracket for Large Surrounding Sound Speakers, Hold up to 55 lbs. (SWM201), 1 Pair, Black

Excellent mounts for the speakers. I am using these to hold up my klipsch RP-600M speakers. And they hold up well. The mounts themselves look good. These are easy to mount, easy to adjust. Highly recommend these!

Been 2 years now since using this, and still holds up really well. They’re incredibly sturdy and solid, very hefty so make sure the wall you mount to will hold it up! Easily adjustable for different speaker positions. Installation wasn’t difficult either. Overall fantastic for the price.

These performed very well for years and survived three home moves. These were used with Klipsch The Fives Speakers and never had any issues with mounting or durability. The speakers have quite the low end and even with the power they produce, it did not affect the stability of the speaker mounts. They can hold their rated weight and can clamp with enough force to tilt your speakers to a proper listening angle. The way they clamp onto the speakers helps them to blend into their surroundings so they are quite stealthy as well. They never took center stage in appearance.

I got these to mount a pair of JBL studio monitors. Installation was very straightforward and they seem to be very sturdy. I like the tilt/swivel capability so the speakers can be pointed to exactly the right spot. It came with included wall anchors which I tossed. There were no studs available at the mounting location so I was mounting into drywall. For each bracket I used three of the "screw-in" type anchors which are rated to 50 lbs each. Those suckers aren't going anywhere.My only knocks are the wall plate cover doesn't actually click or attach to anything, it's just kind of hanging there. Seems to be ok for now but feels like it could fall forward; time will tell. Also the mechanism for adjusting the side brackets that hold the speaker into place is kind of clunky... it's just a long screw that you screw in or out with a screwdriver. But it gets the job done.Overall very happy with the purchase; seems to be good bang for the buck.

These are an excellent choice to mount my Sony SSCS5 bookshelf speakers! Really easy to assemble with the included instructions. The included hardware is actually good. The adjustment for different size speakers is nice for future applications. The anti slip pads add a nice piece of mind. Highly recommend these mounts!

I have Edifier R1280DB speakers and I wanted to position them to the ear level and did not want them to occupy the desk space anymore and not settling down to using stands of any sort.They are nicely packed and come with all the screws necessary to mount it and secure the speakers.I was concerned that due to the powered speaker weight, I will need to screw the speakers in however, the clamping design is so intuitive and strong that I am sure itll hold and I save my speakers from drilling into which is a huge plus. Another concern was rattling of any sort or distortion which also has not proven to be the case perhaps thanks to the soft fabric material that is glued everywhere where the clamps meet the speaker, I must admit this was cleverly designed and I approve this 100%!The only issue I had was that I mounted the speaker in the clamp before seating the clamp into the wall mount part, I did it nice and centered also been careful not to push off the rubber pads only to find out I have to take the clamp part off because I forgot to put in a mounting bolt with a plastic washer first. After doing that correctly another issue was placing it this way onto the wall mount part, aligning the bolt through the plastic arm and then wall mount metal while maneuvering the heavy speaker with attached clamp part... I could just do the difficult work first and then mount the speaker on assembled wall mounted clamp but I did want to have it perfectly centered and not to damage the rubber pads of the speakers and this could be done only with the speaker being up side down. As I was almost done, I could not understand why I couldnt finish off the very last step which was same steps as stated above but on the left speaker, upon screwing a bolt with included nut, I placed a washer from underneath where Clamp part meets the wall mount part, routed the bolt through, placed the nut (part: N8 Nut-h) and started to twist it counter clock wise, luckily I didnt let go of the speaker right away, I wanted to make sure theres grip and resistance as I kept screwing it in, to which I realized Im twisting this nut for good half minute, I reversed the turning direction and same thing, no resistance, it just loosely kept turning. So I took the speaker off and then inspected the inside of the nut. BIG DISAPPOINTMENT and anger overwhelmed me. The nut has no thread! How am I supposed to finish my project? Luckily I do keep all the screws, bolts, washers and nuts from old furniture and I did happen to have a metric M8 nut in the house. Otherwise I would have to run to home depot and waste at least 40 minutes of my day which I find very sad! Sad is the look of it now as well. The nut I'm using is screaming compared to the right speaker which I hope is a temporary solution as I will be contacting the seller regarding the nut issue and post the results here in an Update form.Otherwise a 5 star item, well, I would give it 4 because I wish it could be retractable and erectable when it comes to distance from the wall but then I assume my wanted feature would cause rattling and imbalance in the entire assembly so 5 star it is for the product as it is sturdy and holds a powered speaker under any tilted angle desired and rambling bass it wont give in, hold speaker securely and without any damage to it whatsoever, so if youre using it for passive bookshelves w/o rubber pads on them, even better - simple install, just make sure youre securing this to a wall! Physics are at huge play here considering these have to hold across the bass factor which would loosen up any screw from a drywall without serious anchoring.Edit: Contacting the seller was a breeze and received replacement within just a few days by mail free of charge. I offered sending the defective part back which was not necessary and seller sent me two nuts actually. Very friendly and professional service. Definitely great company standing behind their products.Regarding the items functionality, nothing has changed since day one, hold speakers in angle you tilt them at, while moving them left, right. The sound clarity I am getting now is unbelievable and virtually makes me feel the sound comes even from behind me. The way I have them tilted downwards 5 degrees facing my ears the way I can see left speaker's right wall with my right eye opened but when I close right eye, left eye cant see that side wall only face of the speaker. Same applies in reverse order to the right speaker. The setup is 60 degree triangle in about 1 yard distance. Would NOT be achievable without this product. Reviews do not lie. If youre considering between other products of same price range like I did, these tilt and have foam padding, they dont rattle and are very very sturdy. 100% Recommended!

I am not going to lie, I was expecting these to be completely plastic but as it turns out,These mounts are metal. The size and fit is perfect for my speakers and what I need, the assembly is easy and works well with just about any regular size monitors. Since they are metal their weight is a bit on the heavier side, but it is bot really much a problem. Lastly the way the set up is works really well too for being easy to remove when you need to take them down.

I'm looking for some slick wall mounts for my surround sound speakers. They gotta be sturdy, but not an eyesore, you know? Ideally, they'd be adjustable so I can fine-tune the angles. Bonus points if they're easy to install.