WSDCAM 5 inch TFT-LCD Screen CCTV Camera Tester Monitor Support 4K 8MP CVI TVI AHD SDI CVBS Analog Camera, Support HDMI in VGA in PTZ Control/DC12V Power Output/UTP Cable Tester, 3200-Plus

I am a broadcast engineer by trade, but also do a lot of work in the IT field as well. My current primary job requires me to test the performance of DVRs used to monitor point-of-sale locations. The technology varies; sometimes VGA, sometimes HDMI. I also use it to troubleshoot digital signage installations. But an important use for me is as a test monitor during remote TV broadcast productions. High end broadcasting uses a signal format called SDI that a lot of portable monitors aren't equipped to handle because of its specialized nature. But this little unit does, and at a price hundreds of dollars less than most SDI capable monitors. Just yesterday, it was used to aim two POV 'dunk' cameras on basketball backboards, while on a ladder, in a production for a major TV sports network. These cameras only output SDI, and having this monitor with me saved a significant amount of time over having to borrow one, usually a bulkier one, from the production truck. I was asked by other engineers where I got it, so I suspect that more of these will be sold to folks that need to view SDI video.

Great picture on monitor and easy to use.

I am using this tester to quickly identify defective cables and equipment in a variety of applications—for example HDMI/VGA video cables, USB drives, Audio cables, Network cables and Analog security cameras. In the past I’ve spent a lot of time reconfiguring components when the problem was simply a faulty cable. So this tester allows me to work more effectively and so far results are impressive.Network Cables. I tested several UTP Ethernet network cables with RG-45 connectors and the device’s screen display showed a network diagram, the speed of the cables and whether or not they were defective or useable. This permitted me to identify the type cable and if it was good or needed repair or replacement. Testing is easy there is an included plug that goes on one end of the cable and the other end goes in the tester.HDMI & VGA Cables. I have a number of cables on-hand and suspected some were non-operational and was also curious to know if as required for my specific TV I had actual high-speed cables connected. In testing several revealed they were defective, no picture, and I could confirm that my TV was connected with the specified high speed cable. Testing is easy just disconnect the cable from the TV and plug it into the tester, then select the proper cable and software from options on the device screen and the cable specs are displayed.Audio Cables. I have a big bin of audio cables and suspected some in the group were defective. Testing is easy—plug one end of the audio cable into a sound source and the other end into the tester. If operational the tester’s built-in speaker will play the sound.USB Drives. The device confirms if a USB drive is operational and also permits a review of the contents. There were a couple of minor issues—the device did not detect whether the drive is USB 2 or USB 3—it identified them all as USB 2. I don’t know but this may change with a future update. Also, the manual states to use the Media Player option on the screen for USB testing which at the time of this review is actually the Document option.Analog Cameras. Using the included adapters I connected it to an analog camera in my home security system to first position the camera and then check specifications to ensure the camera and cable were operating correctly. For example the screen displayed that the camera and cable were delivering 1080p at 30 FPS.Included with the device is a hard shell storage case, network cable test tool, AC power adapter with an included USB A to USB micro cable, a wrist strap, a lanyard and 4 adapter cables. Battery charging time to full capacity was 3 hours and after testing all of the above only half the charge was depleted. Excellent functionality—saves time and money.

Best use it has is to find the best place to do the installation.... helps a lot!pros:-the kit has all the cables and the case is nice and functional quite complete.-decent battery lifecons:-did not work with some cameras that already include audio by BNC cable ,looks but does not work audio(I have not been able to do more tests but this is what happened to me 9/10)

I ordered the Wsdcam Camera Tester because I had an immediate need to test several Cat 5 cables, which this device can do, and also because I need to test a 20-camera CCTV system that is acting up. I decided that I would do the testing on my own rather than hire an outside company. I have not yet gotten to the CCTV system, so my review will be based on the cable tests that I ran, and on the unit overall. My assumption is that this device will work as advertised for those areas that I have not tested.The kit comes with the handheld tester, charge cord and wall adapter, cable tester, four connection cables, neck strap, carrying case, and a manual. The tester is powered by a 5200 mAh Li-Ion battery good for 6.5 hours operating time, with a 4 hour recharge time, according to the manufacturer. The tester’s case is good for carrying the tester and its components, and it should protect the tester from light abuse that it might be subject to during transportation.The tester has a 5 inch color LCD screen that has decent enough imaging for this device’s purpose. It is not a touch screen despite having that appearance when powered on. The set of keys on the side of the screen control all functions and selections of the tester, and they work well. There is a built in work light that is handy when working above the ceiling tiles. The tester has eight different input connections where cameras and other devices that are being tested can be plugged in. There is a 12-volt DC output that can be used to power devices being tested. Lastly, there is a USB Type Mini-A used to charge the tester’s battery. A suggestion to the manufacturer is to change this connection to a USB-C connector so that a more standard cable can be used to charge the device.I used the camera tester to check the integrity of several CAT 5 computer cables that I suspected might be defective. By plugging one end of the cable into the tester and the other end into the included cable tester terminator block, the tester provided information on the quality of the cable, its connectors, and its wiring schematic. One of my cables tested bad, and the others were okay.The tester also verifies input signals from devices, so out of curiosity I tested the HDMI output connection from my laptop. I connected a HDMI cable to the tester and to my laptop, and the laptop signal displayed on the tester. This process is similar to how the camera tester verifies the output of the cameras being tested.This is a very useful device for testing whether CCTV cameras, cables, or control devices are malfunctioning. It can also test the quality of a camera’s audio input. There are a myriad of other tests and features that are packed into this device, much more than I will ever use, but for a professional CCTV repair person, I believe that this camera tester will serve them well.