Professional Universal CPU Water Cooling Block for Intel/AMD Water Cool System Computer Black

No leaks and seems well made. Does not fit AM4 socket unless you use the stock hold down because the holes on the block do not line up. So I cut the ears off and just used stock hold down. Works great. Recommend highly checking the bolts to ensure they are tight when block arrives. My cooling block bolts where not all the way tight when mine block arrived.

I bought this for my AM4 build and it got me by, I will end up fixing my AM3+ build and use it there. It does do a good job of keeping temps low, fat better than what I had originally anticipated for it.

Block for Intel/AMD Water Cool System Was not the right fit for my build, it looks great, well made interior galleries are a nice touch. The bolt holes did not line up to the MSI mb I had purchased. Actual dimensions in the description would have been helpful. I used the Rufus AI to match this product to my main board, it was not accurate. The holes are 2”x 4” approximately that nearly fit. The MSI MB is 3 1/2” x2” . I returned the item without issue.

I actually think this product is good and works well. The reason i struggle to give it a better review is that there arent any instructions and the mounting hardware is odd. it is hard to know if it is tightened down enough so i had to take it off completely to make sure it had good thermal compound spread and was making contact with the CPU. I was lucky to realize that there are a few listing for this same block and one of the others does show how to install it (not the way that the nuts/washes come on the bolt). if they could add instruction on the product page that would really help. I also had to modify mine since the bracket made contact with some components on my motherboard but a quick hacksaw and grinder took care of the issue.as far as cooling goes my temps are all around 35-40 idle and doesnt seem to go above 65 under load which is great for my dual cpu system. these are a really good cost effective way to cool a cpu.

Yeah, it's not meant to be a GPU cooler, but it works.I modified the bracket to fit my 3070 ti and added individual copper heatsinks to the memory. I have 2 92mm fans blowing on it to cool the memory and left the stock aluminum plate on there for structure and cooling of the VR FETs. Everything is running much cooler. GPU might get to 60 and vram around 80.Btw, there is no aftermarket cooler that fits my Dell OEM GPU.

Have bought two of these already and highly recommend them. Cheap as heck and they work awesomely, what more do you want?

This does NOT for my AM4 board no matter what I do. The mounting holes don't line up with anything on my board at all. Can't even modify it to fit the mounts.

Works as advertised, 4 stars because it came with no instructions, no backplate, the instructions are hard to find online and the ones I found were slightly different looking in the product it was describing, the screw down system is weird in my opinion, the plate is high quality, the mechanism holding it down is not, made it work even though I don't think I did it the right way and my CPU temps are holding where they should be so overall I can be happy with it