Harbor Freight Dust Collector Bags for Central Machinery 35 and 70 Gallon Dust Collector | Made in USA

The media could not be loaded. Looked all over for Harbor Freight dust collector bags. These work great. Good thickness and no leaks. 5 bags in the package. Just use some painters tape to hold them up under the flimsy clips while you install the clamp and you’re fine. Back in business again. Same length as OEM bags and fit with just enough circumference to go on easily.

These bags were replacing old fabric bags. Something I did not realize is that the "collector" bags allowed as much air flow as the upper "filter" bag. This is important because, since the air cannot flow through the plastic bags, it must all exit via the upper bag, or in my case now, the filter I installed. This causes quite a bit of pressure on the lower collector bag, making it billow out. I paid the extra price for these bags based on some reviews of the cheaper bags and my opinion that cheapest is usually not the better choice for any product. I now fully understand some of the negative reviews of some of the cheaper bags. I don't want a bag that may give out when partially full of sawdust. These bags won't. I highly recommend paying a few dollars more for the better bag if for no other reason than peace of mind. My only very minor complaint would be how they are packaged: you have to unfold the stack of them to get one out. It is not a very difficult or time-consuming thing to do, would just prefer they were packaged interlaced like garbage bags. Again, not a real big problem, especially since I will only be replacing it at multiple-month intervals. That said, mounting the bags can be quite easy or quite difficult, depending on how you do it. I found that the plastic slips off the rim quite easily and became exasperating. The solution was simple, using strips of electrical tape (or any other tape), tacking the bag in place as I worked around the rim made the whole process quite easy, taking less than 2 minutes. I hope this hint might save you some frustration. I did not rate durability because I've only just installed one, but I expect them to hold up well. I will also add that though my collector label says it uses 33" bags, these 43" bags are not too long. In fact, had I ordered 33", I don't think they would have ended up resting on the floor, but the bottom would have been above the base plate. In summary, these are well made, fit the bill and give me the peace of mind that they will not fail, blowing sawdust all over the shop (and they are made in the USA).

Fit good on HF dust collector and sturdy bags. Would buy again

They work pretty decently

Arrived quickly. Fits good. A little thicker then the original which I hope means that it will last longer.

These are great quality bags for my Harbor Freight dust collector. And a much better price.

These made it much easier to swap the bag on the dust collector rather than attempting to empty the original bag. These are thick and stand up to some wear and tear with the dust collector moving in the shop or larger bits getting through the dust collector. These bags were also the right diameter for attaching to the dust collector while other bags I've tried were too lose and in turn difficult to attach.

Seems to be of good quality. Just started using the first one and it works as it should.