Full description not available
Manufacturer | Tadeto |
Part Number | GR20 |
Product Dimensions | 6.06 x 3.63 x 6.06 cm; 18 g |
Batteries | 1 Lithium Ion batteries required. (included) |
Item model number | GR20 |
Colour | Black |
Power Source | Battery Powered |
Wattage | 1 Milliwatts |
Item Package Quantity | 1 |
Included Components | Digital Angle Finder & USB-C Cable & User Manual |
Batteries included? | Yes |
Batteries Required? | Yes |
Item Weight | 18 g |
D**D
Excellent piece of kit
So easy to use and it fits in your pocket. I am installing some driveway gates. The pavement outside my house is on a gradient and the drive raises up from the drive. In the past I would have used a spirit level which is common practice on the gate posts. But is not as accurate as this piece of kit. Because the gates are quite heavy steel and composite infill. The posts need to be as near vertical on 2 sides as possible, also the gates have to also rise when opening. The calculations to get the angles of the rise is a bit complicated, unless you are good at trigonometry. By using this piece of kit and finding the required angles. I then went into my kitchen, placed the inclinometer on the work surface and put several pieces of post it notes under one end until the required angle was shown. Turned on the laser and measured from the worktop to the laser. This gave me the measurement of the gate rise.I have every confidence that the end product will be as accurate as it can be. This should be a better method than trial and error.
R**D
Superb digital level
How on earth did I manage without a digital level? This is super, seems very accurate, has laser lines either side.Couple of things reduce its usability. The screen helpfully switches round if it's reorientated. But as one is normally aiming at a multiple of 90 degrees, it means it keeps jumping orientation.Also I haven't managed to make calibration work. It says before commencing calibration you need to put it on a surface so it reads zero. But it's so sensitive it's really hard to put it in such a surface without it wandering, even if only by a hundredth of a degree or so. I doubt it needs calibration and have checked it by flipping it round on a surface, it seems fine within tolerance of about 3 hundredths.
I**N
Very good.
Good kit
M**E
Sturdy Angle finder
Will keep it short:Very well made. Aluminium extrusion body. Front and back plastic parts are well made.The screen is big and easy to read. ( some feedback showed that the display has scratches: the screen has a protective film. You can hardly recognise it but there is. Peel it away and you have a nice looking window.)White backlight, very bright.Accuracy is good. 0.2degr. Compared with your normal level spirit it is way better and easier.Mm per meter or %.Laser left and laser right: very handy. (can be switched on off individually)Small in size.Build in battery: easy to charge with provided usd cable. Battery is 300mAh. Will last approx 2 hrs. Has auto shut off. (can be cancelled)Manual is okay.Nice box or pouch would have been icing on the cake.
A**R
Had worse. Had better
It’s okay. Not brilliant, just okay. No carrying case is a big minus. Laser is very weak. It is however easy to use. Oh, and the instructions are in that wired semi Chinese/English language. Would I buy another? No, I’d look for a better one.
M**N
Does what it says on the box
Works perfectly
J**R
Brilliant tool
First time use for putting new radiator on wall, finding plumb lines, good clear laser, easy to read dial and very accurate. USB chargeable wins out over replacing batteries
A**S
👍
👍
S**N
moyen
livraison rapide comme toujours avec Amazon prime 👍je trouve cette objet moyen , impossible de le positionner a 00.00 en appuyant sur un bouton donc obliger d'avoir une surface de nivaux pour l'utiliser, je trouve pas sa topcommander pour ajuster une lame de scie a onglet donc pas toppour le reste tout est okje vous la recommande pas pour régler du matériels
C**2
Un inclinómetro digital que facilita el trabajo
The media could not be loaded. El medidor electrónico de ángulos viene en un soporte de plástico, dentro de su caja de cartón, acompañado de un cable de carga USB a USB-C (1m) y un manual de usuario, que incluye español.La carcasa es metálica, incorpora un imán en la parte posterior y uno en la parte inferior/base, para ser utilizado en superficies metálicas. Tiene un peso ligero de 100g y una medida de: 60,4 x 60,4 x 31mm. Tiene una batería recargable de litio, de 3,7V y 300mAh. Con una clasificación IP54, está protegido contra al agua y al polvo.La pantalla digital LCD retroiluminada (diámetro legible de Ø40mm), está protegida por una lámina de plástico retirable.La lectura de números grandes en la pantalla es fácil, incluso con una inclinación de 180°, al estar equipada con doble información, los números cambian automáticamente en modo de lectura normal/horizontal. Esto no sucede si se inclina 90°, la solución es inclinar la cabeza para leer, o presionar el botón "HOLD" para retener la medición tomada.Sin uso, se apagará automáticamente después de 5 minutos. Cuando está apagado, se puede cancelar el apagado automático, pulsando los botones “OFF” y “HOLD” durante 3 segundos al mismo tiempo, apareciendo parpadeando “COU” de 3-4 veces y cambiándose automáticamente al modo de uso.Si no se presiona el botón "HOLD" después de la medición, aparecerá el mensaje "Err" al inclinar hacia adelante/atrás desde un ángulo de unos 30°, pero las líneas láser permanecerán encendidos. Entonces, cuando se usa acostado boca arriba, no le mostrará números/ángulos. Cuando se utiliza el láser, aparecerá un símbolo triangular en la pantalla.No es estable y no se puede usar, colocado en los lados pequeños, en un ángulo de 45°.Tiene una precisión de +/- 2° y puede medir de dos modos, en absoluta (ABS) y en relativa (REF). Cómo calibrar y otra información se puede encontrar en las fotos/vídeos adjuntos.Se puede cargar completamente (desde cerro líneas en pantalla hasta 3 líneas, máximo) en 1 hora, desde cualquier fuente de 5V mediante un puerto USB. Con una carga completa puede funcionar durante 2 -3 horas, dependiendo del uso o no de las líneas láser.Considero que es una muy buena ayuda para medir inclinaciones y mantener la línea recta con la ayuda del láser, especialmente en obras de albañilería, y no solamente. Les recomiendo que lo tomes en cuenta. El precio del producto no se tuvo en cuenta en esta calificación.
M**.
Petit joujou très pratique,
Alors, un inclinometre c'est ni plus ni moins qu'un rapporteur, ou un mini niveau, bref un petit appareil électronique qui est censé remplacer nos bonnes vieilles méthodes.Alors oui il est pratique de la voir avec soi, il est bien conçu et présente de nombreux avantagesMais pas plus fiable qu'un bon niveau à bulle ou une fausse équerre.Un peu plus moderne, il donne la sensation d'être plus précis mais la encore, tout est relatif,Quoiqu'il en soit, ce petit joujou est pratique et il a vite trouver une place dans ma caisse à outils, il servira à minima d'un excellent niveau !Dommage qu'il n'y ait pas un petit étui de rangementEn espérant avoir été utile !
D**X
Kompakt, genau, Qualitativ sehr gut, leicht zu bedienen -> nehme ich lieber als die Wasserwaage
positiv+ kommt sparsam und sinnvoll verpackt+ Gehäuse aus Metall, Vorder- und Rückseite aus Kunststoff, Ladebuchse mit Gumminippel verschließbar+ Einschalten dauert unter einer halben Sekunde+ einfache Bedienung, teilweise muss man lange drücken -> lange drücken entspricht maximal einer Sekunde, was ich als angenehm empfinde+ Genauigkeit ±0.2°+ es lässt sich der Absolutwert anzeigen, oder man kann eine Fläche als Referenz nehmen -> die Messergebnisse der dann gemessenen Flächen zeigen dann den Unterschied dazu an+ kann über USB-C aufgeladen werden+ Ladezustandsanzeige in drei Schritten+ hohe Empfindlichkeit+ Rückseite und Unterseite Magnetisch+ beleuchtetes Display+ IP54 geschützt (staubgeschützt und gegen Spritzwasser geschützt)+ Anzeige hat einen guten Kontrast, die Zahlen lassen sich noch aus 2-3m erkennen, dann wird es mit dem Komma je nach Sehkraft schon schwierig (Aber man weiß ja es sein muss)neutral/Informationo Laser rechts und links separat oder einzeln einschaltbar (spart Strom, wenn man nur einen oder keinen braucht)o Anzeige bei Winkeln in 0,01°-Schritten, Genauigkeit jedoch laut Anleitung ±0,2°o Dauer bis das Ergebnis stabil angezeigt, ca. 2 Sekundeno der Laserstreifen geht mindestens 6m weit an der Wand entlangund ist noch hell zu seheno Einheiten/Nachkommastellen:Winkel °-> 0,01mm/m -> 1% -> 0,01in/ft -> 0,001o für mich ist im Haushalt die Anzeige in mm/m am sinnvollsten. Die Gradzahlen mit zwei Nachkommastellen reagieren für mich schon zu schnell. Wer drauf angewiesen ist und Geduld hat schafft es aber auch mit dieser Genauigkeit zu arbeiten.negativ- ?Fazit:Bisher konnte ich mit dem Winkelmesser sehr gut Löcher für Bohrungen an der Wand markieren. Das geht mit der Laserlinie sehr einfach. Das Gerät ist nicht sehr schwer und die Rückseite ist rutschhemmend, sodass man es leicht mit einer Hand an die Wand halten und mit der anderen die gewünschte stelle markieren kann. Zu zweit geht es natürlich noch einfacher. Am Ende waren die Löcher doch nicht perfekt auf gleicher Höhe, da der Bohrer beim Bohren leicht verrutscht ist. Das liegt aber nicht am Gerät... Wer lieber einen längeren Strich zeichnen möchte, nimmt eher doch eine Wasserwage, die gleichzeitig als langes Lineal funktioniert. Man könnte sich auch eine Leiste als Lineal nehmen und sie mit dem Gerät an die Wand halten, dann bräuchte man aber den Laser nicht.Wir werden es auf jeden Fall mit in den Campingurlaub mitnehmen, um dem Faltcaravan auszurichten. Einfach hinstellen und in Echtzeit den Winkel ablesen.Von diesem Gerät bin ich begeistert, es kostet aktuell fast 31€ das ist viel Geld aber man bekommt dafür einen sehr guten Winkelmesser, der sich leicht bedienen lässt. Die Verarbeitung ist sehr gut. Auch als Geschenk für jemanden der Werkzeug mag ist es gut geeignet.
U**A
Fait le job
L'inclinomètre fait son travail pour le prix auquel il est vendu.Étant professionnel, j'ai des outils similaires de marques connues et donc beaucoup plus cher.Il y a effectivement une différence avec un appareil pro mais pour le prix proposé, il fait le travail qu'on lui demande.Bref le rapport qualité/prix est au rendez vousSi vous voulez mieux bin c'est plus cher
Trustpilot
1 week ago
1 month ago