SAPHUE Electric Guitar Wiring Harness Prewired Two Pickup 500K Big Pots 3 Way Toggle Switch for LP Electric Guitarra

Installed on epiphone les paul special ii. It works great, the length of the cables were great, it made installation effortless. I'd buy it again. Worth noting- -the volume for cuts out early when rolling it down. -the tones control is great! -3 way switch very solid, on the stiffer side, needs to be broken in. -on my epiphone I did have to make the holes slightly bigger in the body for the pots to slot through. -the knobs you'll want are the professional bigger scale. I modified mine to rig them on it.

I used these on two very specific application custom builds, expanding the single-pickup Vox SDC-1s into little tone machine with the addition of a neck pickup. I use one of the two guitars with this wiring every day, and I am merciless when it comes to swapping pickups mid-groove. The body of the SDC-1 is routed for two pickups and has a deep channel under the pickguard for this style of switch (it is pretty substantive and goes deep into the well). The installation required a bit of modification to the pickguard, but the sound quality in the two builds (with different pickups) is very nice. Perfect size, well built, gave me a completely different guitar for very little cost ... something that I'm all about.

I have an IYV guitar I love to play but the pots were small and noisy. The pots and switch and jack on this harness are good (enough) quality and are quiet and move evenly. And WOW do the large pots make a difference in the tonality of holume knob sweeps... I'm knocking it down a star coz like other reviewers said, the base plate on the switch is meltable plastic... it should be circuit board material. But it does move well - at least currently. It's amazing what a diffeence just having upgraded eletronics can do for a budget guitar ... But like other commenters said, it might be hard getting these pots in... there was not enough room in my guitar for shielding tape - I had to use paint. EDIT The pot stems are longish ... I wish they made a short stem version ...

Good set of control's and wired ,they work fine . I'll re working a guitar I made in 1968 that has some PDF 1950's Humbuckle pickup on it. Buffed out the guitars finish.

It's the cheapest one here that works. Nothing bad to say about it

Small pots. bad solder connections, not worth buying, one pot had a short

No serious problems. The rhythm / treble switch is clunky as hell, feels like I'm breaking it. The solders are flimsy and the wire gage is microscopic. If you're delicate this will work fine.

Just what I needed! While I made some modifications for my specific build (removed tone, used a different jack port) - this hardness was good quality and well put together. Would and will likely buy again

This worked great for my project.