Auxbeam4" LED Pods 18W LED Light Bar Flood Beam LED Off Road Driving Lights with Wiring Harness for SUV ATV UTV Trucks Pickup Jeep Lamp (Pack of 2)

First, the lights are bright enough for our evening golf cart runs in our retirement community. Second, the excellent wiring harness alone is worth much of the price.I gave these lights 4 stars for "Easy to Install" because the wiring harness has shielded, female spade lugs on the wiring harness for the two light connections, but the lamp leads are only bare wire coming out of a nice vinyl shield. I had some spare male lugs, soldered them to the light leads (hint: make sure you drill the hole for the lamp cable just large enough to allow the lugs to pass through -- I had to clip the sides of the lugs before soldering, to reduce the lug width to pass through a hole sized for the cable shield), and the rest was easy.I think they're bright enough for 4-wheelers and utility off-road vehicles, but not for driving. For our use on the streets of our community, once I had them aimed right, they are excellent.The lens, housings, wire quality, and adjustments are very good, and I recommend these lights.

Very pleased to far. Easy to install, although I only used enough of the harness to splice it into wiring I already had in place. Harness was barely long enough to connect these on either side of the hood on my '97 4Runner, but it worked using CBI off-road brackets. Installed for a couple of months and no water behind the glass yet, nice and bright, seems like a great value to me

I have a pair of these for about 2 months now and I love them. I got them to replace my headlights on my Polaris ATV as replacement bulbs would have been over $40 a piece! So this was a no brainer. The supplied mounting brackets worked great as well. All I recommend is when you first get them take the 4 Allen screws out and pop off the sides and just bead some black RVT or some sort of sealer around the edges to seal them a little bit better. My four wheeler sits outside in the rain and I wash it after every ride and have zero moisture in them at all. Great product would buy again!

Installed these on my 2014 Ducati Hypermotard.First off, I took a star off because if you buy this light+harness kit, the lights should already come with connectors so it’s plug and play or at least have connectors in the box. Not a huge deal, but worth a star for a slight inconvenience.On to the lights and harness themselves.For the price I don’t think you’ll find lights with a better build quality or light output. You’ll have to spend 5-10x the price of these on that one name brand light company for more light output.The “spot” beam seems to be a mix between spot and flood, at least on a motorcycle. They don’t cast light super far but far enough and bright enough to be very helpful.So far I’ve tested these on pitch black twisty canyon roads and in the middle of the desert on a dirt road and even by themselves without my led headlight they are pretty bright. Actually more useable light than my headlight. My headlight just casts light farther.While in the desert I laid the bike down twice in deep sand and both times the right side light was crammed into the dirt/sand. A few scuffs and slightly tweaked bracket but nothing broken and the lights still work perfect.The wiring harness is a bit long for motorcycles, obviously these are intended for cars/trucks, but very easy to install and the harness seems just as well made and durable as the lights.I would definitely recommend these for someone who wants to add some more light output to their vehicle while also being budget friendly.

These lights are decent , I got the projector style, output does what it's supposed to do, now I too can blind others that have their off-road lights on during regular driving .

Super bright. Used them on my DRZ 400 Dual Sport. They seem pretty rugged and like they will last a while. If not, they are super cheap to replace! The wiring harness is actually great if you have common electrical knowledge plus it's pretty straight forward. Red to the red black to the black on the battery or some type of ground. White wires are + black are - on the pods. I had mine installed in about 25 min.

Bought these complete with their harness. After a bad switch, and a couple factory wiring errors, I ended up using my own harness. I was told Auxbeam was 1 of the best "bang for the buck" lighting companies, and thee lights are good. But now I have to get another harness to replace the 1 I had to use on these. A small headache, but a headache I shouldn't have to deal with.Long story short: get the lights, skip the harness.

Used on a 8hp briggs engine on an MTD snowblower. Worked very well however only one will work since its 18W per light. Havent gotten to test it out in the snow but it will beat the days of using a headlamp! Ditched the factory wiring harness and used 16 awg primary wire to extend the stater and make a ground. Dont really need a fuse for something like that.