Baomain Pneumatic Air Foot Pedal Valve VF200-08 PT 1/4" Nonslip Momentary 2 Position 3 Way Foot Switch

I put this on a harbor freight blast cabinet along with a blast gun, now no more trigger to pull. I've used it for many hours with no problem.

This model works very well. The others brands I bought were too weak, thin.

Worked as expected, Going to buy another one as a spare since this pedal is heavily used

For over 10 years, I'd been using a trigger operated blast gun in my HF cabinet. Sure, they work and are fine, but I needed to change things up and finally converted it.Part of the upgrade was adding a pneumatic vibrator/shaker to agitate the media hopper, but I wanted it to be operated in conjunction with the gun, not run constantly. With this pedal, I added a T and split the output to feed the gun and a regulator to control the vibrator. It works perfectly. I feed the pedal with 1/2" od dot brake line into a push lick fitting and output to the gun with a 3/8" od dot line with the same fittings and the shaker with a 1/4" od vinyl line. Very clean and easy, and makes this thing world's better. Literally everything in the box aside from the actual box and perf steel plate was purchased here.

I use this to operate a mist coolant on a milling machine. This allows minimizing the amount of air and coolant used. It's lasted through hundreds of on/off cycles. There are similar industrial units that cost 4 times as much and I've used those at my job, but frankly, this on is easier to connect up.

The foot pedal works great. Would buy again if I need another one

it works on a sandblaster however drops the pressure at the gun down to about 50psi due to internal restrictions. I removed it and just ran the air line straight to the gun for full pressure.

Great for having on the blast cabinet so not having to pull trigger all the time.