16"OD x 3 1/2"ID x 1 3/8"P Traditional Thermoformed PVC Ceiling Medallion (Fits Canopies up to 9 1/2")

This is a high-quality escutcheon cover-up plate for a ceiling light at a great price! We replaced an old ceiling-mount "boob" light that had a 12-inch diameter, with a chandelier that had only a 3-1/2-inch canopy. Of course there was a ceiling paint ring around the old boob light because of the different amount of paint fading that had occurred over the years. Rather than repainting the entire ceiling, this simple escutcheon canopy looked like a good option. It is not clear from the description, but others have noted that you get two for this price. What seems odd is that, especially as you get two, it much less expensive than most others on Amazon. I have installed several other escutcheon plates and this was of equal quality to others that I had spent more for. Further, the thickness of the plastic is quite good and I found that the plate easily supports it own weight, meaning that it does not sag and it really doesn't require any glue or caulk to hold it in place. It looks quite nice as well. For installation, you just slide it up around, or slightly over, your electrical box and fixture and any mounting screws, and then use your light fixture's canopy to hold the escutcheon plate in place. I found that I needed to notch out some of the plate's plastic under the canopy to allow the mounting screws for my light fixture to hang down properly but that is easy enough to do with a drill or just a razor knife. Once the light-fixture canopy is screwed up into place the escutcheon plate stays in place nicely just by friction. Because of the stiffness of the plastic, the plate mounts easily and there is no gap between the ceiling and the edges of the plate. We have white ceilings, so I am using this unpainted and it looks fine. However, our ceiling paint is flat, and this escutcheon plate has a slight semi-gloss white appearance. If i ever get out my ceiling paint, I may paint it in place. But for now it looks great and it nicely complements our new light fixture.

Saw some reviews talking about poor quality and was a little discouraged but still tried it. Yes this is a thin plastic piece but honestly that makes it very versatile for wanting an easy and lightweight fix. Was able to put this up easily and it fit right under the 5.5" light base I had. Used caulk to get a finished seal and it's perfect! No fake wood grain texture like I was seeing with so many others too.

I needed to cover an electrical box and some ceiling damage under my ceiling fan. It's very light weight, and very thin. It was very flat. I used a little caulk as an adhesive to stick it to the ceiling, then mounted the fan bracket on top of the Medallion. It's white and looks OK. I probably could have spray painted it to try to match the fan. The only reason that I gave it 4 stars was that there is a small gap at the outside edge. The Medallion is actually molded with a slight gap. I don't understand why they wouldn't have molded the Medallion with a slight interference on the outside edge. It's barely noticeable, but may be worst for some people.

Great plate for what I needed. Large size, looks really nice on the ceiling. The material is plastic but it looks like molding. I found some flat paint helps the effect. Easy to install/use.

Long story short, we needed something quickly to cover damaged drywall around an old light fixture. This was cheap and arrived the next day after ordering. I don't know why we received two, but I'm glad we did because one was damaged. The plastic is paper thin and so the edge on one was bent. The other one that was not damaged had a black blemish on it that I was able to rub and get most of it off but not all. You definitely get what you pay for but, wow, was this thing flimsy? Like I said, this was an emergency situation for a guest bedroom so it'll do for now, but even still, I'll probably replace it at some point. I'm giving it 3 stars because it functions as it purports to do and is sufficient for us for now, but it's just not a high-quality item. Luckily, it is on the ceiling under a ceiling fan so it is mostly covered and most likely will not be noticed that much. I would recommend this product as a temporary solution as I've described but for something more permanent I'd advise paying a little more to get something a little sturdier and of higher quality.

I wanted to change my entry way pot lots to hanging lights so we used a pot light converter kit. The kits come with small medallions that didn’t look right with our new lights and the new light base was just slightly too small to cover the pot light hole. We went with these medallions and it’s exactly the look we were wanting. No they don’t sit flush but they look fine with our 10 foot ceiling. We had to cut a little bit of the medallion to fit with the metal cover for the pot light kit but that was easy to do with some scissors and using the metal pot light cover as a template.

É perfeito! E dá pra colar com uma fita dupla face de tão leve

Me encantaron. Son muy ligeros y fáciles de instalar.

Been looking forever for a black one, Black spray paint worked. Love them (yes I got 2).

Way too flimsy. For the price I expected something more sturdy. It was a great colour and shape/pattern and would have looked great - but I returned it.

Exactly what we needed