H11/H8/H16 LED Fog Light Bulbs or DRL, 6000 Lumens 3000K Amber Yellow Light, 300% Brightness, CSP LED Chips Fog Lamps Replacement for Cars, Play and Plug (Pack of 2)

Great upgrade for foggy and rainy conditions. The yellow light cuts glare much better than white bulbs and noticeably improves visibility at night. Easy to install, perfect fit, and consistent color with no flicker. Adds a nice classic look to the car too. Highly recommend.

I installed these H8 LED fog lights in my car. They installed easily and are working well so far. They have a bright, consistent yellow color output. They fit in my H8 fog light housing without issue, although they definitely are larger than the factory H8 bulbs. Overall, I’d definitely recommend these. Note: I didn’t get these for free, I paid for them and this is a genuine, non-sponsored review. Packaging: These fog light bulbs come in an attractive package. The box feels sturdy, there’s foam insulation inside to protect the LED bulbs, and it feels like a nice unboxing experience. Perceived Initial Quality: For the price, I immediately thought that these bulbs seemed to be very high quality. Overall nice metal housing construction, plastic connector, and LED chips. A fine product for the price upon initial inspection. Ease of Installation: These LED light bulbs fit directly into my housing without any modification needed. I was a little bit worried that I might have issues, considering that these bulbs are a little bit larger, but I didn’t run into problems. Physically swapping the bulbs took around 2 to 3 minutes per side, although removing and reinstalling the housings took longer. Overall, I would rate this job as a one or two wrenches, out of five wrenches in difficulty. A beginner could do it imo. LED Chips: I chose the yellow color LEDs for my fog lights as I drive in a lot of foggy, overcast conditions. They work really nicely for that. The light output is consistent and bright. The LED chips are large and I believe that contributes to the overall perception of brightness. H8 Halogen vs LED differences: These LED bulbs are definitely a bit bigger. However, it’s not so big that the light bulbs won’t install correctly. They also feel more substantial than the Halogen bulbs I removed. In terms of brightness, there’s no comparison - these LEDs are definitely brighter. Please note that pictures I attached to this review. Overall rating: Although it’s been less than a week, I have no reason to believe these bulbs won’t last. They have been working well and are super bright. I appreciate the packaging and the perception of quality upon the inspection of the bulbs. Comparing them to the halogen H8, they fit in the housing correctly and are much brighter. 5 stars.

The LED design is nice and fit perfectly in my foglight housing. The Yellow LED light output is very nice and bright and the color tone is nice. I installed this on my audi sq5 and it didnt throw any bulb codes and has been super reliable.

I’ve run these LEDs for about 4 months/8K miles and they’ve operated flawlessly. Fitment in the housing is good. The light output is good for LED, and the color has largely remained consistent (slight change to whiter light). For the money, it’s a great buy.

These showed up quickly and install easily! But sadly, for my car, they don't fit even though the fitment tool says they do. The reason? On the TTS, behind the left fog light, is an air intake that limits the depth of the fog light bulb that you can install. The bulb itself fits into the fog lamp just fine, but due to the depth of the base of the bulb that sticks out the back of the lamp, there isn't enough room to screw the lamp back onto the car's frame. The right side doesn't have this issue, only the left side, but as a result, I have to warn any MK2 TTS owners out there - if you have the air intake behind the left fog light, these bulbs won't work for you (most LED bulbs for sale seem to have the same deep base that the regular halogen bulbs do not have). Installation was easy (except for the 'didn't fit' part): 1) Pull the fascia off 2) Unscrew 2 screws holding the fog lamp in place 3) Pull the power off the old bulb (hold down the clamp so it can unclip) 4) Twist and pull the old bulb off 5) Insert this bulb and twist 6) Attach power cable 7) Put the lamp back into place (<<- this is where it fails on the Mk2 TTS) 7) Screw the 2 screws back on, to attach the lamp back to the body 8) Push the fascia back in place Done! I'm giving this product 4 stars because it was made well, fit snugly into the lamp, and were bright enough. I couldn't test it at night on the road, of course, no could I test it for longevity.

2024 Subaru forester limited. Installed pretty easy, I think it’s a fine fit (not as snug as OEM, but shouldent matter. VERY bright and amazing color.

Really solid build quality and color/brightness. Very easy to install, fit snug but not too snug. Recommend especially at this price 10/10 My 3k yellow fogs are miles better than my previous bulbs. 5 minute install on 2018 focus st.

So far so good, very bright and a nice yellow color