SLx Dual LNB with Built in Signal Finder, 4K Satellite HD 2 Output KU Band Universal for SKY HD/Freesat HD

ok works well great to have a signal finder on board as well

Absolutely fab Easy to fit and set up . Better than using a sky meter so easy . Signal on both outputs booming ! Better than sky original set up Thanks for making my life easy. Hardest part was getting to the dish. Only 5mins to change lnb and realign

Bought to replace sky q lnb , have freesat in tv but wouldn't work with existing equipment , bought this fitted in minutes all stations found

The LNB was a perfect fit to replace the existing Sky installed single LNB, I just connected my additional cable run it to the Hugh Max Freeview box and job done. As a DIY’er I was nervous about knocking the dish out of alignment or something and causing myself a lot of grief so the signal strength meter was really reassuring, in fact it allowed me to get an even better signal than I had before ( now full strength !) so I’m very pleased! Really can’t ask for any more for under £20.

Works great make sure you set it up correctly and dish is in the right direction

When it arrived, I noted that it has 2 different coloured (gold & silver) F type connectors, I am still unsure as to what that means. Now for those little blue lights. I am using a Humax receiver with 2 inputs and a 1 metre TRIAX dish. 1 output does not illuminate them, the other does - but ONLY when connected to the gold coloured F connector (maybe that's the purpose of the colour!?). BUT, once they are illuminated, they stay illuminated regardles of where I postion the dish - and I am talking as much as 90 degrees or more off target (28.2 E) azimuth or elevation, which kind of makes them a bit pointless. Sadly, I am unable to receive any channels. I have an analogue metre. I have CENPEK V8 Finder2 digital metre. The analogue seems to be finding a strong signal, but the V8 is a new purchase and I am suspecting it may be faulty as the signal will never rise above 61% and it can find no programmes. The Humax is reporting no signal. I will mention that I am 71 years old and I have installed MANY dishes since the very first satellites started broadcasting (BSB, Sky, Freesat etc), as a hobby but this is the the first time I have encountered problems. I have 2 other LNBs for this dish - one is also a new buy (labgear twin universal) and the other is a much older Labgear quad. I am thinking maybe the Humax is at fault but it was working perfectly just a couple of weeks ago! Maybe I'm just getting too old!!

Arrived quickly, was recommended by our neighbour, the great thing is the built in led power indicator so made it so easy to set up. Great quality too. Fingers crossed it works in the windy weather we get here! Here’s an update after the LNB has now been installed over a month, works absolutely fine, just a point the led signal indicators give good visual display for alignment, but you still need to set the angle (rotating the LNB) to get the signal optimised, it was around 35 degrees on ours but depends where you are geographically and does give this information in the instructions. All in all a great product and a learning curve for me!

Great product

Dose exactly as described on advert thanks

جودة عالية مصمم لتحمل أقسى الظروف المناخية مع حماية ممتازة عن المياه لمدخل السلك

Très bon récepteur pour la parabole pour la tnt fonctionne très bien aucun soucis je recommande

Le prix.

Didn’t work as expected