Mountain Bike Pedals with Reflectors, Road/MTB Pedals, 9/16 Inch presupuesto Lightweight Nylon Fiber Platform Pedals for BMX

I put the K PEDC Bike Pedals with Reflective Strips on my RadPower Mission 1, and they've been a fantastic upgrade. The bright yellow color adds a pop of style, and the reflective strips give an extra layer of visibility for riding in low light. Installation was a breeze thanks to the universal 9/16-inch thread, and they fit my bike perfectly with no hassle.Performance-wise, these pedals are rock solid. The 3-bearing system spins smoothly, and the nylon fiber platform offers excellent grip—even in wet conditions. Whether I’m cruising around town or hitting rougher terrain, my feet stay firmly planted. Lightweight but tough, these pedals strike a great balance between functionality and design. Highly recommend for anyone looking to upgrade their ride with dependable, eye-catching pedals.

Great value, function as expected & hold up to abuse.

I purchased these to replace the Bontrager City pedals that Trek uses as standard on the 2022 FX2 (And FX1, FX3, some of the Verve line in 2022 and likely others as well). I don't tolerate clipless pedals due to a history of knee issues that make kicking out of clipless pedals unpleasant/painfull.I found the stock Bontrager pedals to be less than grippy, even with Five Ten Trailcross LT shoes. So I went looking for a unicorn. I wanted a platform pedal that had reflectors for street fitness riding (drivers in my neighborhood *shudder*) and had replaceable grip studs (in case I needed to replace them or wanted to change the length). I didn't much care if they were aluminum or glass reinforced nylon ("plastic") as well manufactured nylon pedals should be perfectly adequate for fitness riding.At the time I purchased these, they were the only platform pedals with both reflectors and replaceable studs. Weight seems reasonable and out of the box the bearings seem to be smooth without rough patches or noise. The studs that are on them are a good length for me (yay) but unfortunately are just cap head screws (boo) through captive nuts meaning that the thread ends could be damaged making replacing them "fun". I believe the cap head screws and corresponding nuts are M4.Threads for the crank arms were clean and protected with plastic shipping caps. They do use an 8 mm hex key if you'd prefer instead of a pedal wrench. I did not assume that the threads were clean and inspected them before applying anti-seize and installing in my cranks; they threaded on freely by hand until the last turn or so where I torqued them down.TLDR;The Good- Grip- Broad platform- ReflectorsThe Bad- Grip studs are just cap head screws through captive nuts.The Meh- Color (red) isn't a perfect match to Trek Satin Viper Red

I have less than 100 miles on them so far but I don't have any regrets. They roll smoothly and my shoes stay in place. Comes with 4 spare spikes and a few washers (for mounting on the crank?). Nonmetalic construction except for the spikes, so they are lightweight. Unusually wide (front to back), which I enjoy.

Package arrived on time. Upon unboxing everything was in package, nothing missing. All necessary tools included. Fits correctly and easy to install. Four stars because I ordered Pink color and received what looks more like a red color.

I am trying out these pedals because I wanted pedals with three real ball bearings (not DU/"bushing bearings"), that can be tightened with a traditional pedal wrench, and which can accept toe clips (with custom adapters). After installing the 1/2 toe clips, I went on my first bike ride today for a few hours. So far, so good. They are smooth, solid and most importantly, noise free (no clicks or pops that so many cheap pedals have, especially those with DU/bushing bearings). I expect pedals to last for thousands of miles, so I will update my review at the 1000-to-5000 mile mark (if they last that long). I'm hoping. :) If you are interested in mounting toe clips and are into 3-D printing, the adapter brackets are available on printables ( K-PEDC Mtn. Bike Pedals - Toe Clip Adapters for 1/2 or Full Toe Clips ).

Love these pedals! An original pedal on my Specialized CrossTrail bike broke, so I chose these as replacement pedals. I really like how they almost match the color of my bike exactly. I also appreciate the fact that they have a bit larger surface area than the original pedals. I had the old pedals off and the new ones on in no time at all. I would definitely recommend these pedals.

I got yellow on sale and they swapped out easy and feel great in a hard ride. Grip my shoes and feel good and chunky without being gangly.