Metal Storage Cabinet, 36.2" H Locking Storage Cabinet with Shelves and Doors, Metal Cabinets for Home Office, Garage, Utility Room and Basement (Black)

This metal locker is well made. The front of the box says the “CARTON MAY BE DAMAGED, BUT CONTENTS ARE SAFE”. Once you open the carton, you see how well the locker is packaged and why the contents are safe.Open three sides of the carton then roll the box over and remove it from the contents. I chose to not cut or otherwise damage the carton until I was able to inspect everything. You will see metal caps on each end of the bundle. Just tug a little and both ends will slide off. The pieces will be revealed as you remove each protective item. All the pieces were in perfect shape. The instructions were easy to follow. Take your time with the self-tapping screws. They seem a bit hard to screw in at first, but go easy and they will tighten just fine.I put the locker on a wood base. I leveled and shimmed the base, screwed the back to upright supports. The doors have even gaps around the face. The doors open, close and lock without any difficulties.All locker pieces are powder coated with a textured finish. The CJF badge gives it a nice look. I highly recommend this locker.I have added a few pictures.12/14/2022 Note: I utilized the thin fiber boards from the inside package bundle. I was able to cut them to the size of the lower and bottom shelves. With some notching for inside protrusions at the back. They fit really well and will protect the finish on the shelves over time. See latest picture.

Pretty easy installation. Sturdy. With the few comments regarding assembly I had to provide my rebuttal. When you first unpack the pieces, you're going to probably say some choice words because it looks like there is a lot to install. I hate putting stuff together. But, once you start you realize assembling the pieces is a breeze. You don't need small hands to assemble the screws. I had a Dewalt gyroscope screwdriver, which makes it a breeze to install all the screws. All the panels are labeled with direction arrows as well, so you have to be pretty illiterate to make a mistake. I ordered three of them and all were packaged very well and all parts were included.

This product came and we had to build it. It took some time to build but was pretty quick. It fits perfectly in our area and does not take up space. The lock and key is amazing touch and it’s helpful for our storage!

Bought as a locking ammo cabinet, to provide more storage space and an extra layer of security for my ammo cans.Comes packed well, with 1/2" cardboard all around and a pair of bent sheet metal caps to protect the ends.Did not prevent 100% of shipping damage though, there were a couple of minor bent bits once I got it all out. Not a deal breaker, easily straightened out with a pair of pliers.Cabinet metal is thick enough to do the job; sides, top and shelves flex when significant force it applied. Be careful not to overload it or bang it around too hard.Instructions are complete and clear, just make sure you get all the edges slotted in correctly. Phillips head screwdriver only tool needed.Sturdy and very spacious, takes 4 50. cal (large) ammo cans per shelf, could do 5 across with plenty of room front to back, but if too heavily loaded will cause the shelf to flex and sag. I think I'm going to reinforce the bottom shelf with some wood supports beneath just so I can load that one stupidly heavy and not worry about it.Inside has enough height that I get all three shelves with enough room above to grasp the can handles and slide them out.Has two screws and anchors to secure the top back to the wall if desired for safety or security.Locking mechanism is what it is and works well for what it is, comes with 2 keys. 3 point locking on right door, left door held closed by right door.Overall happy with purchase.

Very Sturdy and a breeze to assemble. I saw all the reviews that said it was hard to put together and came damaged, it was simple to assemble and very well packaged. Also came with extra screws.

It came a day early. It was packed very nicely with two metal ends so the box wouldn't cave in, tough thin boards to protect the long sides, plenty of Styrofoam and protective mesh type sleeves. The pieces itself had little indents on some sides but nothing was bent. It will seem flimsy when making it but it's pretty sturdy when you set it up. I put it together by myself and it took less than an hr. Came with all the parts. Looks great. Locks great. Everything was labeled except for a shelf but I knew what it was. Instructions were good. Hopefully my photos get put with it bc it will show how nice it is.

Good way to clear out space in your safe normally taken up by ammo boxes and mags. Took my wife about 45 minutes to put together. Feels sturdy enough for ammo storage needs.

Sturdy and fairly easy to assemble. Great product for the price.