TireTek Analog Tyre Pressure Gauge (0-60 PSI/ 4 Bar) - Accurate Tire Pressure Gauge with 360° Rotating Head Heavy Duty for Cars, SUV & Bikes includes Flexible Air Hose, Straight & Right-Angled Chucks

It’s sturdy, easy to read and practical.

I’d been having a problem with the car’s Tyre Pressure Monitoring system, so decided to get a new tyre pressure gauge to keep a check on the pressures. The Flexi-Pro from TireTek seemed to suit and certainly looked and felt the part when it arrived.It’s a substantial piece of kit and short of a direct hit on the glass front, seems more than able to stand up to rough handling.Its large dial is clear and easy to read and response is fast and consistent. Particularly useful was its ability to retain the recorded pressure once removed from the valve. Unfortunately, after about four lots of use, I noticed that it had lost this ability. Reading through the comments on this gauge, this seemed to be a rare, but not unknown, problem and – as I later discovered – is even covered by a video on the TireTek website.But as it’s also covered by a ‘Lifetime Guarantee’ - and I had registered it with TireTek anyway - I contacted TireTek Support about the problem. Within a couple of hours I’d received a reply saying that a replacement was on its way to me. It arrived the following morning! So far this gauge has proved faultless.OK, so it’s disappointing that a problem occurred. But the true test of a company is how it resolves problems. On that basis, £15 for a Flexi-Pro tyre gauge from TireTek seems a pretty risk-free investment.

Very chunky and heavy duty. Slightly more air leakage to get a seal than on my Draper electronic, and reads 1psi lower than that but no idea which is right. Love the pressure release button which has two functions. First is to zero the guage as it holds the reading after removal from the valve, which is great. Second is to reduce pressure while on the valve which allows simple accurate adjustment as you just overinflate with the pump and reduce to correct pressure with the guage. The scale is hard to read in some lighting conditions due to the protective rubber obstructing the very edge of the scale, and also the psi reading is at the extreme outside. Bar reading easier. I will mark with tippex. The scale is measured in 2 psi increments and labeled every 10 psi (you can see this in the photos). So although straightforward to read, you have to think about it. You need two hands - one to hold the connector and the other to support the guage itself. In the end it appears pretty tough, and although I can't vouch for accuracy, I can say it appears well made.

I have been looking for a decent pressure gauge for both a car and motorcycle.This fits that bill very well, especially with the two attachment collets provided.I did compare the pressure values taken with other smaller gauges that I trust.I am more than satisfied with the accuracy that is easily within tolerance indicated.I think the rubber cover around the gauge is a useful idea, I'm not sure about the hose, as I have seen other units with braided stainless steel reinforced rubber hose, fitted obviously at a premium. On the whole I am very happy with this purchase.

While I've given it 4/5 stars for being easy to use I do find it a little bit fiddly to line up with the tire valve without losing a lot of air. It holds on the its reading until the release valve is depressed and at least I can nip round the car and usually work our which tire needs attention without lugging the pump around them all.

I have been looking for a sensibly priced but quality tyre pressure gauge for sometime. I have found it. The interchangeable chucks are an excellent idea. I challenge anyone to find an application they would not fit. In 50 years of owning my own powered vehicles I have always found getting the angled nozzle on most air lines and pressure gauges to align property first time a bit hit and miss. The straight chuck eliminates that problem, air tight seal first time every time. Checked against other pressure gauges I own (and that is quite a few) this gauge appears to be accurate within 1 psi + -. The other gauges have not been calibrated for accuracy so this is not a definitive test. Since delivery I have been contacted by the vendor checking that I am happy with my purchase and offering support if required.I have no hesitation in giving this the 5 stars

At first it was really great, but now it doesn't hold the pressure when you take it off of the valve. Only had it 1 month if seller see's this please message me as I can't find an option to contact you directly.

Very promptly delivered. Easy to use and read, with both connectors version being supplied, very accurate.Using the straight connector it is very easy to loose the sealing washer when the hose from the gauge is quickly disconnected. There is nothing to retain the neoprene washer in the straight hose connector and the air pressure blasts the washer out of the connector. in just 1 weeks use I have now lost the washer!Pity, otherwise a well built pressure gauge.