61722K 18-Gauge 2-in-1 Pneumatic 2-Inch Brad Nailer and 1/4-Inch Crown Stapler

I bought this to replace a yellow cordless one that failed with hardly any use, which is apparently a common issue with them. So back to “old school” pneumatic. Works well, decent price point. I have other WEN tools and they seem to be well made. Took a minute to figure out the adjustments, I actually had to read the manual haha. My only complaint is that it didn’t come with a swivel connect for the air hose like some of my other tools have, so I had to buy one and retrofit it. I like the dual brad nail/stapler function so I don’t need another tool.

I took this Brad Nailer out of the box, put 5 drops of the included oil into the air connection port and loaded it with 1" SS brads. I set the air compressor to 60 PSI and started nailing two pieces of 5/8" fence picket wood together. It worked like a charm, no adjustments needed. Single trigger pulls worked fine. Next I held the trigger depressed and tapped the nose in several places in rapid fire. Once again flawless. It is well made feels sturdy and weighs just about nothing. The hand grip is soft and very comfortable. This only confirms why this is the 7th tool I've purchase from this manufacturer over the last two years for my woodshop. Yes, I have several yellow tools and red tools, but this manufacture makes tools available at an affordable price, that I may not be able to buy otherwise.

Was looking for an electric brad nailer for the cordless convenience, but the big brands were all $200+ with a battery. I have an air compressor, so I decided $40 wouldn't be a big risk given the other reviews. I was very pleasantly surprised. I used it for a small job (new trim/baseboard install for a bedroom remodel) with 2" nails. Worked flawlessly. Build quality appeared good for the money. No marring on the mdf trim and everything was countersunk consistently after first adjustment. I could replace this several times over for the cost of a big-brand battery nailer.

So far it works well. Time will tell.

Works great for the price keep it oiled like any other nail gun and you got yourself a great gun for years

This one has the strength I need for 2” nails. Should have gone with one that hooks to a compressor. The weight is not to bad, this is used for small builds like shelves. Have not used it for anything bigger than that yet. I want to build a table. The design is good, it’s comfortable to hold. Simple to use and load nails. This is not battery operated, it hooks to a compressor.

I just used this Wen stapler to apply 1/4" crown by 1 1/4" long staples to 1/4" luan underlayment and it worked flawlessly. The depth adjustment worked very well and was easy to use. Not one jam. Easy to load. Comfortable to use. What an excellent purchase!! Highly recommended.

First of all, I read a lot of negative reviews on this nailer, most of them are talking about this as a battery unit. They are describing a different gun. This is an air powered gun. I used it to build shelves in my shop, lots of them. I also took it to my daughter and son-in-law's home to help reinstall some doors. It worked great. If you have access to an air compressor you don't need anything else, unless you use one professionally fulltime. For DIY it is inexpensive and all you need.

I am very impressed with the nailer but I heard a hissing sound, I check all the connection and all is good but it leaks from the top of the nailer. Immediately I do a return and make a new purchase...

no conocía la marca pero si es muy buena, la verdad me hizo el trabajo más sencillo. Trae su regulador de presión, está bien hecha y vienen en una caja plástica.

Works well deptih control works well good air nailer for the price very satisfied

I bought this to finish a project that would have otherwise been a real pain if I went the hammer and nail route. I'm not real fan of air tools as I seem to move too fast and make too many mistakes whenever I use them. Further I haven't had great success with other (borrowed) nailers I've used previously. I've always had trouble getting the heads countersunk to where I wanted. I'm very happy to report this inexpensive nailer performed perfectly. In the 2000 or so brads I used I had no jams, misfires or improperly sunk brads. The only issue I had was when I started using another (Paslode) brand of brads. Even that trouble wasn't long lived as it was a simple matter of understanding that the glue between the Paslode brads was a little thicker than the included Wen brads and required a little care to make sure they are laid completely flat in the magazine before sliding it shut. The tool feels solid but is light enough for extended use. I would have liked to have seen a case included but for the price I won't complain too loudly. I did notice the first half dozen or so brads went in with a little spark coming from the nailer's tip but as other reviews make mention of this and it only happened with the first few brads, I'm not concerned. I am also oddly impressed with the included manual. It is well written and avoids the horrible English translations some of the cheaper Chinese imports feature. The safety warnings listed in the manual are some of the most comprehensive I've ever seen. If you do purchase this item check out the last line of the safety wanings. I won't ruin the surprise but it is the most common sense (and funny) bit of text I've ever seen in a serious manual. I hole heartedly recommend this nailer and would not hesitate to recommend other Wen products if this tool is any indication of their other products.

Es funcional para trabajos ligeros