Aeotec Nano Dimmer, Z-Wave Plus in​-Wall Dimmer Switch for LED, Incandescent, Halogen, Fluorescent Lights, ZW111 1.2A Neutral Optional, Read Power Consumption,White

Works perfectly, clear instructions, and integrates easily with SmartThings and Hubitat.I had one issue in that when set to Off the bulbs would still be very dimly lit. I contacted Aeotec support and received a response in 5 minutes (yes - FIVE minutes!), with a detailed and helpful answer on how to use the bypass addition to solve the problem. This worked perfectly.I’ve used Zwave products from Fibaro, Aeotec and Qubini, but I would absolutely buy first from Aeotec again due to quality of support and integration with Zwave systems.

I have one of these wired into a circuit with 17 downlights, a retractive/momentary Scolmore light switch and then connected to a SmartThings hub. The lights always turn on in a responsive manner using local execution. I will be replacing the SmartThings hub with a second Hubitat hub in future. Like me, you may need a dummy load to reduce flicker and improve dimming.

Came home to find the breaker tripped. On inspection, the Aeotec dimmer has visibly deformed through excessive heat, scorch marks and no signs of life. This was installed in a 47mm backbox with plenty of room.I originally purchased it as a potential additional dimmer to two other Fibaro Dimmer 2s (they've been running fine for 18m+. The Aeotec lasted 3 days before failing in a potentially dangerous way.

99% of the time works as expected, but sometimes it has some delays.

This is an amazing switch, I really am impressed with how easy to wire up and small form factor, I have a 1930’s house with solid walls, the total depth of my back Box was 35mm, this and the light switch itself both fit, very snog I must admit but do fit.There is just one point I do to make when fitting, as if like myself the instructions are just a peice of paper that sit in a box and never read.The z wave switch automatically detects the light switch, when I installed I only installed the z wave unit then paired with my SmartThings hub to make sure it worked, I then connected the external light switch to find this did not work, after double checking numerous times I had the wires in correctly and using a multi tester on the switch itself I decided to read the instructions. these explain how to put the z wave switch into detect mode, in my case 4 quick presses on the z wave switch as I was using s1 (s2 requires 6 presses) then toggle your external switch and now all working.The energy usage is also working with the SmartThings hub

The media could not be loaded.  I like the dimmer and it performs very well however I do have an issue and would be happy to receive suggestions on how to resolve it.When the dimmer is powered on from the mains switch the attached LEDs flicker/blink twice or sometimes three times before properly turning on. I have tried using the bypass but that does not cure the issue. I have attached the video to explain the behaviour.

Excellent little unit, so easy to wire in and set up. Instructions veery clear and concise, wiring diagrams easy to follow, and works with two wire system behind my light switch. No issues adding to my Z wave system.

I've several of these and they work flawlessly. I am running OpenHAB and have had to reprogram the switch function from momentary and they are fast and reliable.The dimming mode can be changed according the the bulb type and supports both leading and trailing edge.

I bought 5 Aeotec nano dimmers. Out of 5, one was dead on arrival so it was exchanged by Amazon. Another one failed after about 2 years. When they fail, the light would remain turned on without any possibility to turn it off which is very incovenient.For the price paid, I would expect them to last more, I would not recommend them.

Allumage tamisé de lumière nickel!Le réglage de l’intensité est top et agréable!Installation mérite peut être un peu de précisions pour des novices. Sinon impeccable!

Prodotto funziona bene è molto piccolo riesce a starci in una scatola portafrutti a 3 posti si connette in z-wave Smart HUB di Samsung è con l'applicazione Smart things si connette ad Alexa

Funcionó a la perfección y a la primera, sin necesidad de neutro. Importante leer bien las instrucciones y ver el esquema de instalación antes de meterse en faena.

Ho diversi device Z-WAVE di diverse marche. Ho voluto provare AOTEC avendo il loro dongle USB per la gestione dei componenti Z-WAVE ed essendo molto affidabile.Ho riscontrato però non diversi problemi nell'utilizzo del Nano Dimmer, soprattutto dal punto di vista delle performance. Il tempo di risposta ad ogni comando è molto alto, soprattutto quando si agisce sui pulsanti fisici a cui il dimmer viene collegato.Li riconsegnerò.