BATONECO 3/16" Brake & Fuel Line Clamp with Screw, Stainless Steel 24pcs Street Rod Custom Dune Buggy

Great strength! Solid pieces.

While true, they take a while to arrive, mine took a month exactly- it clearly stated this on their Amazon page. In red print below the price it says "Usually ships in 1 to 2 Months". Personally I wasn't in a big rush anyway. I recently restored an old Jeep and replaced all the rusted original brake lines with a very expensive set of stainless brake lines. The originals were held in place on the frame with specialized single-use plastic clips of several designs of which only one can be currently purchased for around twenty-five dollars-each! So I don't mind spending nearly $12 for a dozen stainless steel clamps! The ones I received had no major burrs- enough to jeopardize the integrity of the stainless brake lines. If I wanted to , a quick trip to the wire wheel on the grinder could quickly remedy the situation. The allen cap screws are M5x.08 fine thread, so I drilled and tapped for these in some cases. I also used M5 captive nutserts (Stainless) for others. This is actually the preferred method if you have the tool to do it. Anyway the quality and value for me, is very acceptable!

These are made of good quality stainless steel. Shiny and new. However they come with torx screws so make sure you have torx bits.

These really add an extra level of finished detail over plastic or this stamped sheet metal. Surprised but please as how thick they are. Oddly, the Allen head screws are more mirror like, but the combination of the two just adds an additional accent that I think looks really good. Some places I will be using these are really suited only for sheet metal screws, so probably can't really use these Allen head with each clamp. But nice to have them as an option.I plan to use these for brake lines and for some wiring loom feeds. I saw another review that said the inside lip edge had some burrs. I checked all of mine, and they were clean, but probably you should check each one anyway. Because the square edged, I think I will still give them a quick single pass with a fine file to leave the inside edge slightly chamfered smooth.I would definitely use these again. They are very reasonable priced and very solid. I also plan to look for some in larger sizes for heavier wire bundles. I give them five stars.

These are very strong and appear to be made of quality materials.They fit the average size vehicle brake line but could have other uses.Have the screws come with them is a nice convenience.Also a very good value.I would purchase again and highly recommend!

These are nice little line clamps. They are well made and sturdy. Worked good.

Nice uniform finish, no sharp edges

Ordered this set of clamps for the fuel line for our 1933 Ford Cabriolet that's nearing completion. The clamp size is correct but I'm not sure if the screws are the correct length. I found 2 clamps with a couple burrs but the other clamps are fine. Overall, I'm happy with their quality.The only thing I'm unhappy about is it took 1 month for them to arrive. Did not know about the delay until after the order was placed.