BOJACK IRFP260 MOSFET Transistors IRFP260N 50A 200V N-Channel Power MOSFET IRFP260NPBF TO-247AC (Pack of 5)

BOJACK IRFP260 MOSFET Transistors IRFP260N 50A 200V N-Channel Power MOSFET IRFP260NPBF TO-247AC (Pack of 5)

Q: If im trying to drive a 12v solenoid with this, would i be able to use the 3.3v signal from an arduino to switch the solenoid on?

Yes, you certainly can! I've driven solenoids and relays off of the 3.3 V signals from the Arduino using this very MOSFET as the driver, and it works very well. This MOSFET, like all MOSFETS, has a very high input impedance, and is voltage controlled like a vacuum tube. So you draw hardly much current at all from the Arduino to control it. However, I do prefer to drive these MOSFETS using a slightly higher voltage using a basic switching transistor (like NPN 2N3904) to crank up the voltage a little higher from the Arduino before applying it to the gate of the MOSFET. Also, I generally prefer to use an opto-isolator between the Arduino and MOSFET to protect against any chance of kickback from the solenoid or MOSFET. It's pretty straightforward, but I will include a simple diagram here in a video when I get a chance. Always be sure to put a clamping diode In reverse bias across the relay or solenoid to dampen the high voltage kickback spikes from the solenoid or relay. I hope this helps to answer your question. Recapping, you can drive an N channel versions of this MOSFET directly from the Arduino, but my preference is to use an intermediary switching transistor and/or an opto-isolator. If you use the P channel version, drive the gate using a PNP switching transistor, such as 2N3906. Again, as time permits I will include a video diagram since a picture is always worth a thousand words. But I hope this helps in some way to answer your question!

Q: is this a logic level mosfet? will i be able to switch 12v with a 3.3v signal?

Yes, indeed! You can drive it from 5.5 Volts quite nicely. It is designed mainly as an end output device used for switching large current flows. Having viewed the signals directly with a scope it turns on and off quite fast and with a clean signal, On the other hand, like most MOSFETS you can also make a pretty nice linear amplifier with it too. But again, it does switch on and off quite well as a logic controlled device. I hope this helps answer your question somewhat.

4.3/5

Product ID: 500457902

Secure Transaction

⚡50A Drain Current

💡300W Power Output

🔋200V Max Voltage

Frequently Bought Together

BOJACK IRFP260 MOSFET Transistors IRFP260N 50A 200V N-Channel Power MOSFET IRFP260NPBF TO-247AC (Pack of 5)

ALLECIN IRFP250 IRFP250N MOSFET Transistors 30A 200V IRFP250NPBF N-Channel Power Mosfets Transistor 30 Amp 200Volt TO-247 (Pack of 5pcs)

Taiss 200PCS Potentiometer Kit with Rotary knobs,WH148 B1K 5K 10K 20K 50K 100K 250K 500K 1M ohm potentiometers Single Linear Taper Rotary Audio B Type Potentiometer Assortment and Nuts, Washers

Description

⚙️ Power Up Your Projects with BOJACK!

PACK OF 5 - Stock up and save! Perfect for engineers and hobbyists alike.
UNLEASH POWER - Experience a robust 50A drain current for high-performance applications.
VOLTAGE CHAMPION - Handle up to 200V with ease, ensuring reliability in demanding environments.
EFFICIENCY REDEFINED - Maximize your projects with a powerful 300W output, perfect for any setup.
N CHANNEL EXCELLENCE - Designed for superior switching performance, ideal for modern electronic designs.

The BOJACK IRFP260 MOSFET Transistors are high-performance N-Channel power MOSFETs, capable of handling a maximum drain current of 50A and a voltage of 200V. With a power output of 300W, this pack of 5 transistors is perfect for both professional and DIY electronic projects, ensuring reliability and efficiency in every application.

Specifications

Brand	BOJACK
Manufacturer	BOJACK
Country of Origin	USA
Item Weight	32 g
Package Dimensions	7.19 x 5.21 x 1.7 cm; 32 g
Item part number	BJ-MOS-260N
Are batteries included?	No

Have a Question? See What Others Asked

If im trying to drive a 12v solenoid with this, would i be able to use the 3.3v signal from an arduino to switch the solenoid on?

is this a logic level mosfet? will i be able to switch 12v with a 3.3v signal?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

₨1450

Duties & taxes incl.

Seychellesstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Reema J.

Perfect platform for hard-to-find items. Delivery was prompt.

1 month ago

View all Trustpilot reviews

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

BOJACK IRFP260 MOSFET Transistors IRFP260N 50A 200V N-Channel Power MOSFET IRFP260NPBF TO-247AC (Pack of 5)

Description

Specifications

Have a Question? See What Others Asked

Common Questions