3M VHB 4941193 Adhesive Tape (Paper Liner), 19 mm x 3 m, Grey

Really good double sided tape really does stick stuff together really good

Stick very well

I bought this tape to re-attach the metal badge that had fallen off my 40 year old Volvo 244. I noticed the badge, that fits on the driver's side wing, had slipped and was about to fall off one morn - it looked like it had been fixed in place with adhesive in the Gothenburg factory in 1980 so I sought something similar to replace it.This 3M VHB was the right size and the strongest I could find. It was delivered quickly and well packed for transit. I'd already cleaned the back of the metal badge with a small abrasive wheel and the painted surface of the car wing with acetone (this is absolutely essential), the tape was easy to use and produced a very strong bond indeed after 24 hours. The badge should be held in the correct place for the rest of the life of the car.Since I have used the VHB tape on a number of similar projects - also with very good results.I recommend this product.

Great product although it works better if applied in warmer conditions (not January in the UK!) The adhesion is not instant needing to cure over a 24hr period, once cured it offers as advertised a very strong bond assuming you are bonding compatible materials (in this case plastics). I used the tape to attach a door bell to a uPVC front door. So far it appears to have done the trick.

I use this tape to stick various items into shadowbox frames and it simply holds anything and everything! The only limit is the surface you're attaching to!Price is on the higher side, but you get what you pay for and it's worth it!

I bought this tape to use with my headphones and wireless Antlion modmic. The magnetic clasps of the modmic have 3M tape on them to stick them to headphones, but it's not reusable. As I regularly change my headphones (because I'm addicted to headphones), I have to put fresh 3M tape onto the magnetic clasps. This stuff is perfect (and the same tape that Antlion use). This tape leaves no marks on headphones, I've used it on headphones ranging from £100-£700. None were affected.I also use this tape to stick my Soundblasterx G6 to the underside of my desk. It's incredibly strong! I tested it one day and couldn't pull the soundblaster away from the desk without using something to pry it. But the tape left no marks on the Soundblaster unit. This stuff is superb!

We use the clear and black versions of this tape to mount all manner of items within the premises of our mid-sized engineering firm. I have yet to see any failures when using this product. Over the two-plus years we have been using this product it has remained stuck to whatever we have applied it to and the mating part. Maybe some other users have had higher than reasonable expectations but I remain to be amazed at the versatility and performance of this product. The only negative point I have encountered is that it can be slightly tricky to remove the backing film once you have applied the tape to a surface, but if this is a necessary downside for the adhesive performance then I am more than willing to live with this.

I had to put my rear dashcam in a new car, the kit that came initially never caused any problems so I wasn't expecting it to fall off on a regular basis. I used 3m foam adhesive and have had to replace this approximately every 4 weeks, admittedly there was some unexpected hot weather during this time.I thought this was worth a go, and tried to follow instructions to the letter ( not so easy, it says don't touch, but you have to cut to size!) Anyway I measured and cut with as little handling as I could, stuck one side onto the actual dashcam and then struggled to get the backing off, I had to use tweezers, then I stuck it to the rear windscreen and kept it in place with masking tape for 24 hours. 2 weeks later, and a hot spell that hit 28°C and it's still firmly in place. If it falls off I'll edit.March 2022, it hasn't budged!!!