BisLinks Plastic Bumper Buttons Jack 3.5mm Lb Rb Controller Replacement Part Compatible with Xbox One

Seemed to be pretty similar to the one it replaced in the broken xbox controller. little fiddly to fit but once in works a treat. Much cheaper than buying a new controller, which was my son's first choice!

The media could not be loaded.  They don't fit. These are the correct ones for my xbox one pad and they do install but the bumpers don't operate. Watch the video for a full explanation. Fortunately amazon has an easy returns system.

Purchased it to replace a broken RB button on my Xbox One controller (model 1697).It fitted really well. A little tighter than the original, but once in place, the controller was as new.I gave it 4 instead of 5 stars because the black colour is slightly more matt than the original (which is very much piano black), so the buttons look a little weather worn compared to the middle piece. Not that you notice it when you use it though...

The left-side bumper button on our white XBOX One wireless controller broke away after being dropped, and whilst I was able to pop it back in and continue using it, the button was loose and not as responsive as it was, so I looked for a replacement bumper-button set, and the BisLinks one is a perfect fit.To open the controller, there's plenty of Youtube videos that will help, but you will need a T8H torx screwdriver or driver-bit (this has a small hole at the tip, so it's a security-bit rather than a normal Torx one), and I will say that instead of using pry-tools to get the grip covers off, I just laid the controller on it's front, and pried the grip covers off with my finger-nails, holding the covers at the outside edges of the controller, and rotating towards me towards the back-centre of the controller, and the covers came off without any issues - they will feel as though you'd break something, but they'll be fine and they will pop off.Be careful when inserting the new bumber-buttons, as there's a few little catches and plastic-legs that need to go in the right place, so best to take a good look at the one you're taking off first, and perhaps even take a few photos if possible. I found that my trigger buttons moved out of position a couple of times during the process, so keep an eye on those too, and pop back into position if this happens.Also - keep an eye out for the little bit of plastic that activates the little wireless-reset button - this popped out during the operation, and it's not obvious where this goes back in at first, but there's a little triangle location spiggot on the plastic, which houses into a little triangle in the upper/left area of the XBOX button area, which will align the round plastic section with the switch - keep an eye on this and make sure it's there when you put it all back together. I took mine out completely whilst I was fitting the bumper-switches in the end, just whilst I was aligning the bumpers up and getting them working, and just popped the little wireless-reset section back in when I was casing it all back up.

TLDR: They work for any pad with a 3.5mm jack, be prepared to alter the products shape.Thought I was going insane after comparing these bumpers and the old ones I was using for 30 minutes trying to figure out WHY they wouldn't fit as good as my older bumpers when they looked EXACTLY the same!I use an Elite Series One pad and bought these to replace the replacements I bought in March from a different company. Bought these ones because they were the only product available that didnt come with a toolkit (I have one already) and I was struggling to figure out WHY these would get stuck when I pressed them in... To reslove the problem I had to bend the middle bracket upwards before fitting them for the 15th time to get the bumpers to bounce back up after being pressed.Due to me having to bend the plastic where the connection is between the bumper and the central guide button frame piece, it may affect the lifespan of the bumpers... However I have like 6 pads already so replacement parts are the only way forward for me from now on... This would have been a 5* review if I wasn't within 5 mins of giving up and forced to jeopardize the lifespan of the product.

Fragile as it didn't survive the journey, instant refund was issued and a 2nd was ordered.. no issues fitting and so far it's as good as new.

Ordered 3. One was broken in the packaging. One was completely incapable of fitting due to rising up too much out of the housing. One fit, but was oversized, just enough to be noticeable, but it works, the buttons just protrude more.It seems whoever is making these had the model but not the dimensions, and so the scale is slightly off from the official ones. as a result every side is about half a millimetre too long. If you're lucky, one in three will fit and line up well enough to use, just expect to feel it being a little larger under your finger.

I managed to fix my controller with these, and once installed I can't tell the difference between these buttons and the original buttons. Perfect replacement as far as I can tell. It was fiddly to fix, very fiddly. Taking it apart wasn't too bad, but putting it back together was not easy; but managed to do it in about 20 minutes with the help of a few youtube video's and a six year old willing me on ...

Arrived quicker than expected - plug n’ play: fit perfectly, easy install, tested it out and work great! Now I can get back to poke checking in NHL 19 on xBox :)

El lb del controller xbox one se habia roto y en menos de 10 minutos ha vuelto a funcionar. Tarda un poco en llegar. Tuve que arreglarlo un poco y ha encajado bien.

Perfettamente compatibili con gamepad xbox one s. Spedizione nella norma. Tutto ok consigliato.

Achat pour rien, cette pièce n'est pas compatible avec ma manette, les trous sont différents et aucun moyen de le savoir dans le descriptif...

The bumper not cut enough for Xbox one Controller