This adaptor converts the vehicle-specific radio connector to ISO standard and enables the connection of an external radio in your vehicle. i.e. voltage, 4x speakers, and depending on the model, switching voltage for power antenna and / or amplifier, Illumination, gala signal and mute function. The radio installation is actually very simple and is much faster than you think in most cases. This is due to the now standard ISO connection that many radio manufacturers use. In this case, there are only two connectors that are plugged into the radio, one for the power and one for the loudspeaker. For models where the ISO standard is not factory installed, suitable adaptors can be found at adaptereXpert. Everything you need to install a car hi-fi, you will find here at adaptereXpert (Plug & Play). This adaptor converts the vehicle-specific, Ford and VW cable harness to the ISO standard so an external radio can be connected in your vehicle. i.e. voltage, 4x speakers, and depending on the model, switching voltage for power antenna and / or amplifier. Please note> In most cases, simply connect the plug and everything already will work properly. On some models, there is a non-standard pin configuration for the power supply connector. (switched exchanged with permanent - i.e. red with yellow). These wires can be switched or replaced according to the configuration in the vehicle. The configuration on our adaptor is not wrong, but it is intended to make the adaptor for universal use. compatible with made / modem > Ford Fiesta MK7 (from 2005) Focus (from 2005) Focus C-Max (from 2003) Focus S-Max (from 2006) Fusion (from 2006) Galaxy (from 2006) Granada (from 2005) Mondeo (from 2003) Transit (from 2006).
Trustpilot
2 weeks ago
1 month ago
