Lesnlok 8 x 10 Acrylic Sheet 1/4 inch Thick 6mm 2 Pieces Clear Plexiglass Sheet, for Sign,Craft, Photo Frame, DIY Display Projects (2, 8" x 10")

I was needing to somehow "create" a flat surface for a plastic 4-drawer tower storage piece so that the items I put on top of it would sit on a flat surface. These clear acrylic pieces are similar to the dimensions of the surface top and they are serving the purpose I needed for them to do!

Used these small sheets to make jigs for my router. They were easy to cut and drill into thanks to the paper coating on each side.

The media could not be loaded.  Clear, thick. The paper is hard to remove. I needed these to position a light on my tank. It scratches easily because where it slides on the tank it’s scratched but still clear everywhere else.

It really is a breath of fresh air to order something like this, and get exactly what is advertised, which is exactly what I was needing. It seems like just about every product on Amazon will make their product seem bigger or smaller than it is by deceptive photography, or have the pictures make the product look high quality, but sell you a piece of crap. This product is exactly what it claims to be, and I would go so far as to say it is better than you probably expect. I have drilled very small holes in this for screws, and haven't had a single problem, and I have drilled over 1 in holes, and haven't had a single problem. Obviously, it is acrylic, so certain precautions should be taken when drilling or cutting. I find the best way to cut and drill on these sheets is to take two pieces of plywood, cut to the exact same size as the acrylic, and sandwich the acrylic in the middle of the two pieces, using double-sided tape. Then I cleanly tape around the outside of the entire sandwich, both directions, and then I can cut and drill however I want, with no worries of it cracking or breaking. You still probably need to go slow once the drill bit or saw blade gets to the acrylic sheet. It might not have any trouble drilling through it, and cutting through it, like it is wood, but I haven't tried that. Anyway, I am more happy with this purchase then I have been with any purchase on Amazon in years, and this is just a plain sheet of acrylic. Well two of them. Definitely recommend going with this product, if acrylic sheets are what you're looking for.

Welp! It was good soft (not brittle), easy to cut and manipulate, product. Expensive, but the product was fresh enough that the value was decent.

It took me a lot longer to install this screen protector- I don’t know why, I usually have no problem removing dusted placing it with no air bubbles, took so many tries there are two very small spots at the top that won’t stick. Glad I have a second screen since this probably won’t last as long as I hoped. It looks great aside from the top middle edge and one stubborn speck of dust:

These are great. Awesome quality and came in great condition

I'm making these letter banks for a neighbor's grandkids. I needed a size that I didn't need to cut from a large sheet. These 8"x10" were perfect for the CNC. The drawn type of acrylic doesn't machine well - it just melts and makes a mess of the machine. CAST acrylic is much more suitable to the task. Cuts clean using end mills and V-carving bits. The protective film worked great so I could use double stick tape to hold the sheet to the bed of the CNC. Crystal clear, flat and smooth. If you make signs or projects from acrylic, this is the kind you need! I will be buying this again!