Room Divider 6FT Portable Room Dividers and Folding Privacy Screens, 136'' W Fabric Divider for Room Separation, 4 Panel Partition Room Dividers Freestanding Wall Divider Screen for Dorm Studio Office

I got these dividers for outdoor use for some privacy from neighbors. They arrived quickly and were easy to set up. They look good, and though the legs don’t offer stability against any amount of wind—which I expected as it wasn’t advertised for outdoor use—all it took was placing a cinder block on the feet to hold it up right. Coverage is good, it’s easy to fold and move as needed, and it’s light weight. All in all a decent product. I will caution the purchase of “used like-new,” as both of the dividers I ordered were previously returned items, and one came missing a cap, instructions were not included, and the poles were all mixed up and not properly labeled. If I had not ordered a second divider (which did include the instructions) I would have had a much harder time figuring out which pieces were which and how to put them together.

Since anyone could see the entire living room whenever the front door is opened we decided to get this divider and it’s been great. It allows outsiders to see the divider instead of everything in our living room. The best part is that we can decorate the divider for each holiday since the color scheme is accurate with every holiday; Christmas, Valentines Day, Thanksgiving and even birthdays. The instructions are easy to follow and assembling it was very easy. It’s very foldable. Since we have dogs and the couches on the other side of the divider we’ve added tape to the bottom pieces to stay still. Even when built out the weight of the divider is very light to move.

It does the job. But it has problems standing upright. Be sure to tighten every screw and check to see if it needs tightening every once in a while.

Updated review. Initial purchase was missing some items but may have been Amazon's issue. Seller reached out and made it right. They sent me the missing parts without any fuss.Overall manage your expectations with the price. This is a great, lightweight divider. It is easy to setup and move. It is light, so keep that in mind with your intended use. Consider backing against a table or 9ther support if in a high traffic area.I used it at a ham fest to help breakup a room. I may get more next year.The setup was easy. I put it together in under an hour. I was able to transport it setup but folded in the back of an SUV.Con: lightweightPro: price, ease of use, company support.

Room divider was fairly easy to assemble. The legs provide sufficient weight and stability to stand the room divider. It serves its purpose well and looks good and is easy to move around, if needed.However, when assembling the frames, it included a plastic spacer when attaching each bolt which created a gap between the fabric panel and the frame. I choose not to use them so they provide a little more privacy.I would recommend if you are looking for a good room divider that will give you easy flexibility.

It's thinner and lighter than I was expecting. The "panels" are single-ply fabric that is just a tiny bit thicker than the fabric clothing is made out of. They're almost thin enough to see shadows through if the lighting hits it at the right angle (though I haven't confirmed this). It says 6' but the actual panels only go up to about 5.5.'Overall, this isn't really what you'd think of as a room divider if you're used to the American version of that. This is like a hospital room divider curtain where it's just barely any separation.Even for the low price, I think this is somewhat bad value, hence the three star review. And the assembly is exceptionally lengthy. As one person, it took me basically a whole day.

Great Product! Easy to assembly! Taller than I expected but it’s great! Still trying how to leave it in the room but looking great!

I'm reviewing this as I assemble it.Couple things:1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.NOW on to the utility itself.1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.