SEDETA White L Shaped Gaming Desk, Reversible Corner Desk with Power Outlet and Pegboard, L Shaped Desk with Hutch, Storage Shelf, Keyboard Tray, and LED Lights for Home Office, White

I was a bit reluctant to order after going through the considerable negative reviews, but decided to trust the overall average. And I was not disappointed, the desk has none of the stated issues from misaligned holes to quality and sturdiness, assembly manual made the process a piece of cake, each part is labeled with a sticker that can be mapped to the manual and assembly steps, the final outcome, a great piece of furniture that you can hardly find elsewhere. I'm grateful to the designer & manufacturer, I really needed a corner (gaming) desk for my son. Just be sure to check the measurements and set your expectations accordingly.

I have not been using the table from a long time but so far no complaints.

When I received the order it was in a together small box and for a moment I thought my order was wrong. However, it turns out you have to put the desk together. Some parts of the tables cannot be put into the desk because there is a size difference. It’s one of the two Wether its a mistake by the seller that have given the wrong size of some materials or a mistake in calculation when creating these materials. Also while following the instructions of putting the table together I found a lot of instructions that doesn’t make sense, especially in using specific type of nails where they cannot even hold the table together so I had to choose a bigger size for the table to be held together. In conclusion its a scam and it doesn’t deserve the price of 1000AED at all.

The first 2 weeks it started breaking after one month the mouse and kyboard place under table broke and i don’t think think this table will servive another month (worst table ever )

To be honest, the table is half decent. The residue on the table that is first there is very sticky and very smelly, you will need to wipe the table a few times to remove this residue. I ordered 2 tables and one was in good condition and the other was damaged, might have been through transport. BE WARE, the image is not the same as the product depending on the option you choose. The black one is without the pegboard and without the charging, so you have to choose a color that has what you want. The table is leveled nicely and the finish of the pain is pretty nice. But only issue is the residue that takes time to come off. The side shelf attached to the table is very very wobbly and you can't put something heavy on it. I am not sure if the price matches its value, but what to expect? This is Amazon. But I think you maybe able to hire someone to make it locally for the same price and may be a better quality depending on the person you hire. So overall, if you just want a working table, if is quite good and gets the job done. But if you want something built firmly, you must have it built custom by a carpenter.

Awesome desk, lots of metal supports too so that the inside corner is stable. Wide enough for monitors and keyboard on the desk (I didn’t put the keyboard holder on it because I don’t personally like them, although it seemed good for those that do!) I wish the wood was a tiny tiny bit thicker as it’s very large, but it’s still very stable nonetheless. I recommend! The chair in the pic is HUGE, one of the ones for sitting cross legged.

Esto es para todos los que dudan en comprar un buen escritorio. Está increíble, el material está de gran calidad, el armado es muy sencillo, seguir las instrucciones. La tira de led no pega tanto, les recomiendo prevenirse con algo para pegar esto pero no es nada de problema. Se siente bastante firme, no seguir mueve. El soporte para el gabinete puede soportar un ATX si le quitas la parte de arriba está genial. Si tienes dudas, lo se, yo tuve muchas más pero sin duda no me arrepiento y además la atención del vendedor para mi factura fue extremadamente rápida y en fin de semana jaja Si van a cambiar su escritorio está es la mejor opción para ustedes, todo de gran calidad. Incluso no me gustaba que fuera blanco pero me encantó cuando lo vi, y se siente mejor!

The biggest thing I liked about this desk was that all of the holes lined up. The biggest pain is always that the holes never line up, so you have to bend, push or pull to line them up. But keeping the screws loose while you hand thread them all in first, then tightening them is key. Aside from that, I bought this desk to hold my collectibles, which the three large cubby holes allowed for all of them to fit in, as well as on top. The desk is nice and long, great for work/gaming as everything will fit without getting cluttered. So far, I say this desk is very worth it, especially if you're looking for a longer desk (L-shaped). Wood quality is also great, no splits or particle board damage. Screws did not strip easily, and tightened all the way. I would also recommend two people although one person and some patience ill get it built.

I bought 2 of these, one for me and one for the wife. I got them mostly for the height, as I just recently bought 2 chairs that were taller than our previous desks and wouldn't fit underneath. Instead of ruining the leather armrests on a pair of $400 chairs, taller desks were in order. As I said in the title, you don't put this together, you build it. Unlike other cheap quality put-together cam-and-stud pieces of furniture that I usually find on Amazon, this desk has actual screws and bolts you build it with. I'll be looking for more of this type of furniture from this vendor in the future. The metal is sturdy aluminum, and the wood is 1/2" plywood covered with a high-quality laminate. The box is a little on the heavy side, so unless you're fairly strong, I recommend having a second pair of hands to help you carry it. The box was packed well, using lots of Styrofoam and plastic corner protectors for the wood tops. Nothing was damaged or scratched in either box. Although it's not heavy to push around when complete, the desk is a little on the large size, so I recommend building it in the place where you're going to be using it to make it easier. The diagrams in the book are easy to read, and everything is clearly labeled. From start to finish using a ratchet screwdriver with exchangeable bits (the package comes with a screwdriver, allen tool, and small wrench). Each desk took me about an hour to build by myself. It is versatile and can be assembled as a long desk, or an L-shape left or right. I put a mirror image of my wife's desk (on the left) to show you what our office area looks like with both desks in place. I have a curved widescreen monitor with a large stand. Because of the size of the stand (which is designed to fit in a corner), it takes up half of the 20" depth of the top. As I rent, I'm not allowed to mount things to the walls so I ordered a monitor arm to get it closer to the wall. So keep this in mind for all you widescreen users out there. I have a full-size computer tower sitting on top as it won't fit underneath. The computer shelf has enough space to accommodate a PC that is 9 3/4" wide, 18 3/4" tall, and 17 1/2" deep. Technically, you can go deeper, but you'll need to pull the desk away from the wall or have the front of the PC sticking out a little for anything longer. My external Blu-Ray drive sits on the little shelf above the PC shelf. I could easily stack 2 of them in this little space, and since my PC tower sits above it, running cables wasn't a problem. I like the cubby shelf. I even put a mini-shelf on top that I had on my desk before to keep all my figurines, snacks, and misc stuff. The cubbies are a decent size, 14" wide, 6 1/2" tall, and 7 3/4" inches deep. Then you have all the space on top to utilize. This feature is very appreciated. I opted to not add the pull-out keyboard shelf, as I prefer to have my keyboard on top of the desk. Overall, I am extremely pleased with this desk. It was very well-designed, and easy to put together. I'll give an update to let you know how it works out having a monitor arm attached. Update: I installed the monitor arm and it's been holding up very well. The monitor arm I picked up allows me to mash the screen as close to the wall as possible. As you can see from the pictures, the back of the monitor sits about 4" away from the wall. I went from having 10" of desk space to 16" of desk space (I had to move the desk 2" away from the wall to get it to sit flat). The monitor arm I'm using is the ErGear Ultrawide Monitor Arm. It holds up to 26 lbs. (monitor is only 12 lbs with the stand removed), so it's plenty strong for my monitor. It secures well, holds the monitor in place, and the desk is holding it up without issues. You can get it here: https://www.amazon.com/gp/product/B098JT9SFR/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Just for giggles, I thought I would show the little shelf I put on the top shelf of the desk. If you have enough ceiling height, you could stack quite a few things up there. I'm 6' tall, and the shelf tops out a couple inches taller than me. Anything taller would be too much for me. You can get that little shelf-shelf here: https://www.amazon.com/gp/product/B07BRVSQKX/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Enjoy your new desk everyone!