






Specification:- Product Name:Trunk anti-scratch strip- Material: PVC soft rubber- Installation location: Car rear bumper- Size: 35.43×2.83 inches / 40.94×3.54 inchesHow to install this universal rear bumper protector?- Clean the surface of the install position, to ensure that it's no oil, grease, and wax, and so on.- Tear off the 3M tape on the back of the rear bumper protector from the edges.- Stick in an accurate place and gently press all around the guard to ensure good adhesion. Review: Perfect fit for Honda Accord 2009. - Perfect fit for Honda Accord 2009. Good quality product. Just be careful when removing the tape over adhesive. It can mess up. Remove it patiently. It will be fine. Use rubbing alcohol to clean the surface before installing. Review: Installs easily with a little prep, easy to cut to fit. - Installs easily with a little prep, easy to cut to fit. I bought the wider size since it was only a little more expensive and gives more-complete protection for the full depth (front to back) of the bumper. I've had model-specific protectors in the past, 1 of the clear plastic style, 1 of a rough black plastic (almost like sand paper) style, & believe this thick rubbery style offers better protection at a much better price. I read enough reviews commenting that the cover wouldn't lie flat due to being shipped as folded rather than rolled or flat, so I took measures to fix that. First, I rolled it out flat inside the house to relax g6ir a couple days. Then, I placed it on my dashboard while driving around for a few errands to get it nicely warmed up. Then I rolled it up, tape-side facing out (still with tape-protector of course) & stuck it in a cup holder. I then rolled it out as I prepped the clean bumper with alcohol & a rag. Since this universal cover was too wide for my 2017 Fit, I had to trim both ends using heavy-duty scissors/shears. I used a paint can to trace a nice curve on each end so that it fits the contours of the bumper. My wife helped me so that there were enough hands to expose the tape & stick down the cover while maintaining the right position. We marked both the middle of the bumper & of the cover and worked our way towards 1 side and then the other. It's been a few weeks, including some rainstorms, and so far so good. Very pleased.
| ASIN | B0CLXZ2MC4 |
| Best Sellers Rank | #6,836 in Automotive ( See Top 100 in Automotive ) #2 in Bumper Guards |
| Brand | 8sanlione |
| Brand Name | 8sanlione |
| Color | Blue Edge/Black Flag |
| Customer Reviews | 3.9 out of 5 stars 2,554 Reviews |
| Exterior Finish | Rubber |
| Fit Type | Universal Fit |
| Included Components | no |
| Item Dimensions L x W | 40.94"L x 3.5"W |
| Item Type Name | Protector |
| Manufacturer | 8sanlione |
| Manufacturer Part Number | 8sanlione-Protector Guard1 |
| Manufacturer Warranty Description | 0.1 |
| Material | Polyvinyl Chloride (PVC), Rubber |
| Material Type | Polyvinyl Chloride (PVC), Rubber |
| Product Dimensions | 40.94"L x 3.5"W |
| Surface Recommendation | Bumper, Door |
| Unit Count | 1.0 Count |
A**R
Perfect fit for Honda Accord 2009.
Perfect fit for Honda Accord 2009. Good quality product. Just be careful when removing the tape over adhesive. It can mess up. Remove it patiently. It will be fine. Use rubbing alcohol to clean the surface before installing.
G**F
Installs easily with a little prep, easy to cut to fit.
Installs easily with a little prep, easy to cut to fit. I bought the wider size since it was only a little more expensive and gives more-complete protection for the full depth (front to back) of the bumper. I've had model-specific protectors in the past, 1 of the clear plastic style, 1 of a rough black plastic (almost like sand paper) style, & believe this thick rubbery style offers better protection at a much better price. I read enough reviews commenting that the cover wouldn't lie flat due to being shipped as folded rather than rolled or flat, so I took measures to fix that. First, I rolled it out flat inside the house to relax g6ir a couple days. Then, I placed it on my dashboard while driving around for a few errands to get it nicely warmed up. Then I rolled it up, tape-side facing out (still with tape-protector of course) & stuck it in a cup holder. I then rolled it out as I prepped the clean bumper with alcohol & a rag. Since this universal cover was too wide for my 2017 Fit, I had to trim both ends using heavy-duty scissors/shears. I used a paint can to trace a nice curve on each end so that it fits the contours of the bumper. My wife helped me so that there were enough hands to expose the tape & stick down the cover while maintaining the right position. We marked both the middle of the bumper & of the cover and worked our way towards 1 side and then the other. It's been a few weeks, including some rainstorms, and so far so good. Very pleased.
D**S
Poor Quality
Very poor quality on the tape/glue. Bubbles up and looks awful on vehicle. Ended up removing and throwing away in trash. Don't waste your money on this one like I did.
A**I
Decent
Pretty good. Its a soft rubber piece. Its a little smaller than I expected, but it fits and sticks well.
P**E
Great product, greater price!
Awesome product, especially for the price. I think it was like 10$ vs others going for like 50$. I bought this to protect my bumper from my baby carriage going in and out of my car and it’s worked perfectly. It’s covering up some scratches now but I love the look. It’s super easy to install my husband and I did it in less than 5 minutes without using instructions and it’s held on great. I fit it over the lip of my trunk and I was afraid it would stick up but it hasn’t really it’s very secure if anything the edges on the side stick up a bit but regardless it’s secure. It feels more expensive than it was, very thick, scuff free, no wrinkles. I highly recommend this.
P**3
Nice idea but needs better adhesive
Three stars because not used as intended after trying on car. The adhesive on this strip is in need of a redo. Car was very clean, dry and ready. Started to peel up within 20 minutes. Decided to just give up. Once off the car I could easily, with my finger, roll the adhesive off completely. Decided to try something. Placed on the top edge of my bath tub and the smooth back side actual stays in place without adhesive and adds a better grip on the edge of the tub especially for drying your feet not for grab and lift but just flat use. So, didn't return but didn't bother using on the car. As far as a tub edge grip works great just remove the adhesive before trying so it can be removed for cleaning.
Y**I
Gets the job done !
I have a 2020 Chevy Trax and my first day with my car my dog was super excited to see his new trunk area and scratched the bumper area getting in (he usually doesn’t but clearly first day with a new car was the exception) he is a service animal and travels everywhere with me so figured for such a good price I’d give it a shot!! It looks good, fits perfectly and I cleaned and dried the area before sticking it was easy and simple and so far has withstanded the car wash, rain and regular driving . Looks like apart of the car I’m pretty pleased over all
A**S
Bumper Guard
Nice fit a d good ahesion
Trustpilot
2 months ago
1 month ago