Question 1

Does this battery have built-in protection systems to prevent overcharging and over-discharging?

Accepted Answer

Yes, this LiFePO4 lithium battery has built-in protection systems to effectively prevent overcharging, over-discharging, over-current, overheating, and short-circuiting, ensuring safe usage.

Question 2

Does the BMS also handle charging (so that a bench power supply works to charge it), or does it need a special charger?

Accepted Answer

The Battery Management System (BMS) in a lithium battery serves several functions, and whether it handles charging depends on the specific design of the battery and BMS. In many cases, the BMS does indeed play a role in managing the charging process to ensure the battery is charged safely and efficiently.

Here are a few scenarios:

1. **Integrated BMS for Charging**: Some lithium batteries come with an integrated BMS that handles both discharging (when powering devices) and charging (when recharging the battery). In this case, you can often use a compatible charger to charge the battery safely. Many LiFePO4 batteries have integrated BMS systems that take care of both charging and discharging protection.

2. **External Charger Required**: In some cases, especially with more advanced lithium battery systems, you might need a specific charger that communicates with the BMS to ensure proper charging. This is common with higher-end lithium batteries or battery packs that have more complex balancing and safety features. Using a charger that's not compatible with the battery's BMS could result in incomplete charging or safety issues.

3. **Simplified BMS**: For some applications, especially DIY setups or smaller systems, you might find lithium batteries with a simpler BMS that mainly focuses on protection during discharging. In this case, you might be able to use a bench power supply to charge the battery, but you should be cautious and monitor the charging process closely.

It's essential to refer to the manufacturer's documentation for the specific battery you're using. This documentation will provide detailed information about whether the BMS handles charging, what kind of charger is recommended, and any other requirements or precautions you need to take. Using the wrong charging method or equipment could potentially damage the battery, reduce its lifespan, or pose safety risks.

Question 3

How do you hook up to solar panel and controller?

Accepted Answer

Hooking up a solar panel to a charge controller and battery system involves a few steps to ensure proper and safe operation. Here's a general guide:

**Materials Needed:**
1. Solar Panel(s)
2. Solar Charge Controller
3. Battery (and Battery Bank if applicable)
4. Wiring (solar cables, connectors, etc.)
5. Mounting hardware (if mounting the solar panel)

**Steps:**

1. **Mount the Solar Panel:**
   If your solar panel isn't mounted already, securely mount it in a location where it will receive optimal sunlight exposure.

2. **Connect Solar Panel to Charge Controller:**
   Connect the positive (+) terminal of the solar panel to the positive input on the charge controller, and connect the negative (-) terminal of the solar panel to the negative input on the charge controller. Use appropriate connectors, and make sure the connections are tight.

3. **Connect Battery to Charge Controller:**
   Connect the positive (+) terminal of the battery to the positive output on the charge controller, and connect the negative (-) terminal of the battery to the negative output on the charge controller. Again, use proper connectors and ensure secure connections.

4. **Connect Load (If Applicable):**
   If you have a load (device) you want to power from the battery, connect it to the load terminals on the charge controller. Make sure the load's voltage and current requirements are compatible with the charge controller and battery.

5. **Connect Controller to Battery Bank (If Applicable):**
   If you have multiple batteries connected in parallel or series to create a battery bank, connect the charge controller to the battery bank according to the manufacturer's guidelines. This may involve connecting each battery's positive and negative terminals in the correct configuration.

6. **Configure the Charge Controller:**
   Depending on the charge controller, you may need to configure settings such as battery type (lead-acid, LiFePO4, etc.), charging parameters, load control settings, and more. Consult the charge controller's manual for instructions on how to set these parameters.

7. **Monitor and Test:**
   Once everything is connected, turn on the solar panel and monitor the charge controller's display. It should show information such as solar panel voltage, battery voltage, charging current, etc. Test the load output if you have a load connected.

8. **Maintenance and Monitoring:**
   Regularly check the system for any signs of issues, like loose connections, unusual temperatures, or abnormal behavior. Clean the solar panels periodically to ensure maximum efficiency.

Remember that this is a general guide, and specific instructions might vary depending on the equipment you're using. Always refer to the manufacturer's manuals and guidelines for accurate and up-to-date information. If you're not familiar with electrical work, it might be a good idea to consult a professional to ensure proper installation and safety.

Question 4

What are the dimensions and weight of this battery?

Accepted Answer

Dear customer, the lithium dimensions of this battery are 20.55 inches in length, 9.45 inches in width, and 8.58 inches in height. It weighs  57.32 pounds.

Manufacturer	Shandong Goldencell Power Technology Co., Ltd.
Brand	GOLDENMATE
Model	LFP1210
Product Dimensions	15.09 x 6.48 x 9.5 cm; 1.2 kg
Batteries	1 Lithium Polymer batteries required. (included)
Item model number	LFP1210
Manufacturer Part Number	LFP12100
Voltage	12.8 Volts
Item Weight	1.2 Kilograms

GOLDENMATE 12V 10Ah Lithium LiFePO4 Deep Cycle Battery, 5000+ Cycles Rechargeable Battery, Built-in 10A BMS, Lithium Iron Phosphate for Solar/Wind Power, Marine, Fish Finder, Ride-on Toy, Power Wheel

Details

Product is unavailable

Description

Specifications

Have a Question? See What Others Asked

Common Questions