Ant Esports Crystal X4 Mid-Tower High End Computer Case/Gaming Cabinet - Grey | Dual Chamber Design with Panoramic Glass and USB Type-C | Support ATX, Micro-ATX, Mini-ITX | Pre-Installed 3 ARGB Fans

Super....... Product is genuine, no defectno damege.......i like....

Con:1. The SSD modular panel was missing, but since i dont use a SATA SSD, its ok for me.2. Panel thickness is really thin, it utilizes the components that you attach, for rigidity lol.3. No mesh filter on the side 2x120mm intakeNot really a con but glass on both sides are really susceptible to smudges :PPro:1. Looks amazing, having used ant esports cases before, i know they use safety glass, so even if it breaks you are good.2. Two fans are reversed, so they make perfect intakes for the GPU. One is normal direction which i am not using since i already had a lot of fans. They seem to push decent enough airflow and have proper PWM and ARGB connectors.3. Cable management options are really good. There is enough space b/w the back panel and the mobo tray to route all your wires even thick wires from good PSUs.4. Airflow is great. I have 4 intakes and 4 outlets. All setup in fan control software.5. Very Affordable.

The product is worth the price when on sale. Amazon might dent it during shipping. The case I got had a small dent at the rear right corner.Otherwise, this is a decent transparent case for an affordable price. Zebronics also has a similar model for the same price. The side 2 fans had to be reversed to make them intake fans. The rear fan was touching the heatshield of Asus AYW motherboard and therefore it was relocated to the top.I was able to fit 9060XT Steel Legend perfectly in it.Pros.1. Tempered glass2. ARGB Fans which can be diasy chained.3. Inbuilt ARGB controller with a dedicated switch to change effects. The effect stays in memory even after power loss.4. Great cable management.5. Built in dust filter on top.Cons.1. Fans aren't PWM.2. The rear panel is not rigid.3. No type C port.

I have an Atx mobo and it's covering the half ports of cable manegement also I have 360 aio and it's very difficult to even pass the cables, my cpu cable ports were so stucked with aio after connecting the, fans on topside of the cabinet, airflow is garbage even after using a midrange aio for my 7600x it is bad the temps are bad because of very minimal air flow, I have been using this cabinet for the 10 months and I have bought it when it was launched because of this green theme i paid to Amazon approx 11000inr and I really wanna write this review after almost a year that pls don't buy this cabinet for your mid ranged pc , don't waste your Money, do the research about cable management and air flow and all the stuff and spend little extras on company's like lian li, Nzxt & Fractal design, and yes I don't have argb fans too at the end of you really wanna waste your money & Wanna face problems that comes with this case then buy it and I am going for lian li and also I AM attaching some photos so you can see what I have faced.

First of all i bought this case for 5377 with the discount offerPros - The build quality is good for the price . Got that lian li looksGreat space for cable managementbought it for the aestheticsGreat airflowCons -The preinstalled fans being molex connectors always run at full speed so you can hear the noise . I measured it it was 50 decibel from closeThe quality and materials used could have been better

Loved the design and RGB looks of the Ant Esports Crystal Z2 — it really stands out. Installation was smooth, and airflow is decent. Build quality isn’t the best, but it’s acceptable for the price. Overall, a good cabinet for budget gamers who want style and function.

Product is genuine, no defect

The product quality is pretty decent. Although there are some things to consider if you’re planning to buy it1. It has 3 preinstalled fan and every single one is an exhaust fan don’t know why they sell it this way it introduces negative pressure into the case that means more dust and debris. Even if you decide to remove the top fans and add an aio water cooler and place the radiator on top as exhaust and the remove fans on bottom as intake you will need to buy separate screws for that. And you have to compromise the lighting effect since it will need to act as intake the fan face will be down-face. Also the fan needs to be connected through the ancient molex connector so no rpm controls through soft.2. The fan argb is not supported by aura sync soft only through the cabinet button.3. If you are planning to use this with m-atx motherboard you will need to add two extra screw holes those can be pretty janky.Other the these the case has pretty decent cable management , good room for gpu, its a good looking case.