EZDIY-FAB PCIe 5.1 Adapter - 600W 12+4pin, 16pin 12VHPWR GPU Power Connector, 12V-2x6 GPU Adapter,180 Degree Right Angle - Compatible with RTX 3090Ti, 4070Ti, 4080, 4090 GPU- STD Type, Red, 1 Pack

This little adapter is made of aluminum and feels solidly built. Installation is straightforward. The angular shape and white housing look perfect for my PC. Functionally it's pretty simple, all it does is reroute your graphics card power cable backwards over the top of the card. It's pricey for what it is but you know what you're getting, a little aesthetic accessory.

If you want clean cable management, this is it. Also is of a very high quality, and it's perfect fitting into the power connectors, especially in this case with the 12V line and the known issue with the RTX 4090's (the cable burns/catches fire)

*After finally getting this delivered after a 2 day delay I was very Skeptical of installing this on my brand new Asus Tuf RTX 4090 OC.*I spent hours of research looking into the 12VHPWR failures, Cable/Mod's recall, reddit posts, and watching GamersNexus coverage and testing of the failures.*I finally gained the courage to install this hefty lil 180 adapter knowing what to watch for.*First thing I noticed when connecting the native PSU 12VHPWR cable in is the tight fit of the connector which is a very very good thing, pins inside are making complete contact and cannot be tilted to one side. "Some connectors where loose and could tilt causing the pins to misalign and create incorrect impedance which would lead to pins heating up on the connector leading to failure."*Connecting it to the GPU is just as tight and clicks into place, nice and flush.*After getting it installed I turned on my system and left it idle for about 10 minutes watching the adapter closely and using my Electronics IR thermometer to periodically check idle temps and averages 35c on both connections.Good so far.*I then stress tested my GPU using Metro Exodus Enhanced Edition benchmark and Unigine Superposition maxed out 4k. The temps I seen on GPU Connector 47c- 50c and the PSU connector 48c - 52c and the heatsink 46c.*When compared to IR thermal imaging that GN Steve has conducted, his results where average of 65c on a good cable.*So in conclusion this 180 adapter is actually good. Time will tell and I will update if that changes, if I don't update, that means it's still kickin.

EZDIY-FAB PCIe 5.1 GPU Power Connector did not interface with my RTX1090 GPU, no video was produced on the monitor. However, my flexible wired power connector/cable worked fine and produced video on the monitor. The 180 bend on the EZDIY-FAB made it extremely difficult to press the release tab and disconnect/remove the EZDIY-FAB Power Connector.I returned the EZDIY-FAB, during the return window and received a partial refund. Seller/Amazon claims item was not received, weeks outside the return window and attempts to recoup refund already issued. I would not recommend buying from this Seller for this item. Incorrect advertisement and doesn't follow return policy.

Fits tight connection, temp read at 32c at gpu power connector full load 100 percent bench mark! Very glad makes gpu look nice, note i USING A msi MEG 1000 watt psu that came with 12v 600w cable. Strix 4090 oc.

This is an early review as I just received the part, but it looks great and it's built SOLID. I ran tons of benchmarks and had no power spikes / power loss on wattage or voltage. I've used tons of this brands 8 pin adapters, and cables before with no issues. So I'm hoping there won't be any issues down the line with this. Will update a couple months from now.

For the first few days it worked amazing, after about a week of using it it started to fade out colors, and do a weird glitch where my screen would go black & you'd get audio glitch where it'd be a long drug out robotic hum. I got worried it was my graphics card at first cause resetting it seemed to work. Especially it being a 4090 I thought maybe I got a defective one and the port was melting. So I felt it and the entire piece was hot, I went to take it off and it had melted to it. Luckily I got it off with little problem and just hooked up the 600w cable normally, The coloring was like night and day and I haven't had an audio glitch or black out in awhile.

Fast shipping arrived very secured ! Great product !!! Thankyou so much

Facil instalacion nada complicado, se lo puse a una RTX 4070 Ti sin ningun problema, recomendado para gabinetes que cuentan con poco espacio, ideal para ocultar los cables y para que se vean bien esteticamente.Ojo con checar como viene la entrada de tu grafica, ya que la entrada puede venir al reves, tienen muchas gamas de colores lo que le da un plus. recomendado.

Caused my 4090 to crash and 100% fan spin. GPU working fine with a direct 12VHPWR cable to my 1200W Corsair PSU....

PC組み立ててまだOS,ドライバーのインストールしかしてないので、ゲーム等の負荷をかけた時、何かあれば追記します。見た目に関しては、ケース内配線もすっきりして満足です。

似たような商品で、次のものがありますが、超地雷なので気を付けてくださいEZDIY-FAB 12VHPWR 12+4ピン 180度角度コネクタ 電源変換アダプタ RTX40'シリーズ グラフィックス カード用 RTX4090,4080,4070tiに対応 PC用電源アダプタボード アルミニウムシェル リバースタイプ 白 - 1パック何が地雷かって、電源ユニット側とグラボ側のコネクタが、まっすぐ並んでいなくて、グラボ側が正面からみて右に5mmくらいずれているのですこのせいでグラボ本体の金属フレームにあたり散らして指すことができませんちな、玄人志向の4080Sには装着できましたが、ギャンブルすぎますこの商品はそういうことがありませんのでお勧めします

結論返品しました。理由はほかのレビューにもある通り、画面のブラックアウト、突然GPUファンが全力で回転しだす現象が取り付け後３日で発生。取り外す際もコネクタがギチギチのため、かなり力が必要で非常に神経を使いました。使用しているGPUはPNY4080Sです。