Cooler Master Q300L V2

The media could not be loaded. So this q300l case was released by cooler master in 2018This Case was q500l 2019-2020 predecessorThis case has holes in top, front and bottomI had 5 fan laptop cooler on which this Case is sitting right now, my laptop had fan issues so now it's used for PC case coolingI have attached 2 arctic fans 140mm 1600rpm and 120mm ,1200rpm in front for intake2 coolermaster fans one for exhaust (xtraflow 1500rpm) backcand one for top ( 200-1000 rpm)1 circle fan (1000-1200) rpmMy PC temp with just one exhaust fan was around 45-55 during normal usage and CPU temp was around 64-74 degrees on normal to heavy load and gpu temps were 50 - 60 degreesCPU fan was spinning at 1500 rpm maxAfter bumping up AMD wraith Cooler fan to max fan speed of 2600 rpm in bios settings, my CPU temps went down to 50 degrees.After installing all the fans,My case temps are 36-39 degreesMy CPU temp is at 42 degrees normal and at 57 on load.If your buying this case get at least 2-4 fansYou can 140mm fans or radiator in the front onlyOn top only 120mm can be attached properlyI could be wrong depends on brand and size of 140mm fanMy arctic fan screw holes weren't able to match on top of the case.The magnetic dust filter on top and front can be cleaned easily.The side panel is acrylic, fingerprint magnet.2 USB 3.0 jacks in frontMic and headphones Jack with HD audio but can only do 5.1 channel not 7.1.I had to attach my 7.1 channel headphone in the backCable management very goodLot of spaces in the back.If you have radiator then your CPU temps will get better than mine .This case should cost around 3500 rupeesBut I had no choice but pay up 4500 rupeesCuz it I needed it urgently.This pandemic has really screwed PC enthusiast when it comes to pricing of PC components.4/5My PC specsAMD 1300X 3.8ghz (2018)Sapphire pulse RX580 8gb OC lite (2020) 😑Ballistix red 16gb (2020)😑Cooler master 550 mwe psu (2018)Acer vgo monitor 144hzLG monitor 75hz

My experience:This cabinet has way too many perforations on top, front and bottom. It's difficult to have positive or negative pressure maintained inside. Cooling is affected. So I cut out black paper of the size of the magnetic panels and sort of sealed the top completely, front partially (open enough for front fan to work) and bottom partially (open enough for SMPS fan to work). And I have an impeller fan at the top rear that throws out the heat. This system works very well for me as my chassis fans are at just 1000RPM and ambient motherboard temp is around 38 degrees C. While gaming, the heat from my RX580 is ejected quite well too. GPU temps reach max 72 degrees C. The LED light is added by me and doesn't come with the case.Cable management inside is decent, but could have been better. It gets a little cramped between the mobo and right panel.You can mount up to four 2.5" or 3.5" drives.Front panel has two USB 3 ports and are as fast as should be.The removable dust filters are very helpful.Overall I'm satisfied with this one.

Good product. Fits MATX and smaller motherboards. Mine is a ASROCK B450M Steel Legend. Fits it most ATX PSUs. I have a Corsair VS450. Side panel is Acrylic and not glass but not bad. Bought this from an online Computer spares site as it was Rs. 600 lesser than Amazon. But never the less product is good. Price could have been lesser as it a simple case and no compartments for HDD or PSU separator. It's good for people looking for small tower cases for MATX motherboards

Just received the product today. I needed a small sized cabinet to be kept sideways against the wall and this cabinet size is just right for me. Moreover, i like the modularity of changing the position of the switch on the sides. Build quality is excellent and is light enough to be handled easily. Airflow and heat management is excellent due to the netted structure of the panels; however, it will need frequent cleaning of duats on the inside (im thinking of blocking some parts of the net under the magnetic covers using cardboard as im not a power user and wouldn't heat up much anyway). Wires can be neatly tucked away. Very happy with it!

not recommended to pc gamers or pc stress runners , no heat flow... psu blocks graphics card breathing area...rest all pro gors into drain.. when gpu temps goes up...so i recommend it for showoff ppl... practical its useless...dust collector

Compact, yet components fit in easily, excellent design. Not easily available in market.

Value for money

So afar so good.i loved it