3M Gas Hose for TIG and MIG Welders 3/8 BSP Fittings

good quality hose wont let you down

does the job perfectly

Works great, nice thick hose which is very durable. The brass fittings are are good quality. Would reccomend.

The pipie is good thick type and the ferrols are good 👍

It leaked one end between hose and fitting

Good quality hose, the fitting works well with the regulator. I cut the other end off as my welder was push fit and attached with jubilee clip. Works well.

Well made with propper hose clamps & not jubilee clips or fuel pipe clips. Can't fault them

Supplying this from a Hobbyweld 9L cylinder through a regulator set to 20CFM. Left the cylinder turned on over night (Yes, I KNOW I shouldn't have) next morning, the cylinder was down from 2000psi to 1000psi. HALF my gas had gone. Cut one end off (identified as leaking with fairy liquid) applied sealant and TWO jubilee clips 180 degrees apart. No more leak. Tested the other end..Leaks (dammit) so repeated the process. Good sturdy hose, but WHY don't they pressure test them BEFORE they leave the factory? Seems there's no QC at all. OK after modifications applied, but you'd probably be better off buying the components and making your own.

Bom pelo preço