Dongar Dashcam Integator (10-pin Type B). Compatible with Select Toyota, Lexus, Subaru Models. Power Adapter Connects to Rearview Mirror, Built-in USB-C

Installation tool less than 5 minutes on a 2022 Highlander Hybrid Platinum (with the camera rear view mirror). This is so much better than running a cable to the dash.

I used this to connect a VIOFO dashcam to my 2023 Lexus GX. It fits wonderfully in the liner and saves so much space. It powers up right when I start the car.

I got this to connect my VIOFO A119 mini to my 22 Outback wilderness and it was perfect.The product feels well made. The wires are shrink wrapped well and the connectors are all securely attached. There’s an adhesive pad on the side of the USB port that sticks well to prevent that module from dangling. This also came with three cables, I ended up using the USB Type A to Type C for my dash cam. The cables that came with my cam were either too long or too short.Install was a breeze:1) remove the plastic trim piece between the overhead console and the auto-dimming rear view mirror.2) unplug the rear view mirror3) plug the Dongar dongle into the mirror and then plug the original pigtail into the Dongar dongle.4) push the excess length of the original pigtail into the hole leading to the overhead console.5)replace the trim piece, routing your USB plug accordingly6) stick the USB plug where you’d like with the included adhesive pad7) plug in the dash camThe Dongar setup took me less than 5 minutes. It required zero tools and I did not need to remove any consoles or panels. The plastic trim between the mirror and console can be removed easily with your fingers.Note: this will only power your cam while your car is on. If you want parking mode then this isn’t the option for you.

Works on a 2024 Subaru Outback: Wilderness Edition/Trim.According to ChatGBT, the higher level trims need to use the 10-PIN TYPE B and it worked!

Great idea

Easy installation

Easy install 2023 Lexus GX 460 dash cam. It works great to hide wire behind rear view mirror cover. The “car fit” mistakenly advised that it would not fit the Lexus GX.

So simple. I installed mine in my 2024 4Runner. I undid the upper console and pushed my wires down to the mirror and plug from that end. I dry fit my camera and wanted to test my connection for power. I was scared when the so far didn’t power up. But. I reconnected the overhead console plug, and it must have completed the circuit. So we had power. I buttoned it all up and taped my USB next to the mirror cover and mounted the Garmin mini 3 behind the mirror. You can’t even see the camera and if you aren’t looking for it, you don’t even notice the so far at all. Super happy with the install and that it is so dang clean.