deleyCON2x Universal Speaker Wall Mounts Loudspeaker Wall Mountings Tilt + Swivel & up to 3.5 Kg Load Weight - Ceiling Mounting + Wall Fitting - White

I bought these to replace some tall standing speakers as I got sick of cleaning around the bases so changed the speakers to wall mounted ones.They were so easy to install, simply remove the top small screw remove the mounting plate align to wall and mark the drill holes (x2) for each speaker mount.Put the provided plug in the wall and screw the plate to the wall slide the speaker mount onto the plate and optional tighten the top small screw. To affix to a speaker use the proved smaller screw that is used to hang the speaker you can remove the front portion of the speaker mount for this by twist the top release mechanism which can also be used for the tilt and angle you wish to have the speakers.If your speakers don’t have a mounting hole at the back you can providing the speakers are light use 3M tape to fix them to the bracket.Positives.+ Design.+ Build quality.+ Easy to install.Negatives.- Not all speakers have the same rear mounting point.

I have some Logitech desktop speakers that meet my needs but cluttered up the corners of my desk. I thought about buying some that could be wall mounted, but decided I would try to wall mount the ones I had so bought these brackets.They came quickly in the box were 2 brackets, 4 wood screws (4mm by about 30mm long), 4 M5 screws for mounting the speaker.My speakers are designed to sit on a desk and did not have mounting holes on the back so I dismantled them drilled 2 5mm holes in the back of each and hot glued 5mm nuts inside.The mounts have a metal plate for attaching them to the wall. These slide into to the plastic and have a 3mm screw to secure them. I fixed the plates to the wall using the supplied wood screws. Neither Pozidrive or Phillips bits (even new ones) fitted the screws well but I got them in.Because my speakers have a 60mm projection at the back I made a 10mm spacer and used longer M5 screws to fix the mount to my now modified speakers, so that I would be able to mount them at an angle.The mount then slid onto the mounting plates ( a bit tight but that is good I think), I fitted the 3mm screws (fiddly as they are against the wall) and apart from tidying up the cables job done.They are firm and do not rattle so I am pleased with them

I am a AV installer and to be frank for the price I couldn't complain i did have to modify it slightly so it fit on to a BOSE acoustimass cube speaker (elongate the bottom fixing hole with a drill and file) other than that it does the job fine .

I purchased there to install my LG SPK8-S surround sound speakers for my soundbar. I did struggle to find anything that would fit the speakers as they are quite small, 100mm width and depth. These are perfect. Easy to install and are very sturdy. You only have to install the backing plate to the wall. The mount then slides onto the backing plate. They were the cheapest but the best fit for the look I wanted. I can angle the speakers up or down without removing. Recommended.

Ordered these with a bit of sceptasism having just acquired a set of monitor audio mass 10 speakers. Did not want to pay the daft prices for the official mounts. Whilst the screws supplied did not fit my speakers the old screw mounts from my tannoy tfx did. They are very well made and easy to install. Cracking value for money.

Perfectly good item unless you have a speaker like mine. The back of my speaker is not flat. The speaker screw hole is recessed and the supplied bolt is the wrong length and size and there's no nut supplied to secure the bolt by the other method of hanging it by the notch on the flat part of the speaker.

Excellent product Easy to install

There was two ways I could attach this to micro speakers.I had some extra screws so no issue for me.Good and simple design.Can turn them in as seen in Photo or point up or down. Exactly what I wanted.

Bra kvalitet och välförpackad leverans. Mycket nöjd

Diese Lautsprecherhalterung ist hochwertig verarbeitet. Schrauben und Dübel sind alle dabei und lassen sich leicht anbringen. Wir benutzen die Halterungen für unser Logitech-Soundsystem, die bombenfest halten, ohne zu wackeln. 👍 #Lautsprecherhalterung #Logitech #Soundsystem

Le produit est simple à installer, mais j’ai du acheter des vises supplémentaires car ce qui était fourni était incompatible avec mes enceintes Klipsch

Llevaba un tiempo mirando soportes de pie y pared para los altavoces del 5.1 que tengo en el salón y solo veía precios caros para lo que es realmente, hasta que encontré este pack de dos soportes que incluye todo lo necesario para instalarlos sin comprar nada más. Producto de muy buena calidad y resistencia, sin duda muy buena compra calidad precio!!10/10 sin duda!!

Supporti per casse carini. Sono di plastica dura, si montano facilmente. Le casse che ci ho installato pesano 3 chili e reggono bene, si possono regolare in varie posizioni. Avrei preferito avessero due citi invece che una sola, per sicurezza