Schaeffler LuK LFW193 Flywheel, OEM Flywheel, LuK RepSet Clutch Replacement Parts

If you have a Jeep wrangler Tj with the straight 6 engine and 5 speed manual ( or straight 4 with 5 speed manual tranny) this is absolutely the flywheel for you. When I opened I found packing grease on it to keep from rust so don't worry just blast it with break cleaner and put it in. Remember if you have the 6 cylinder torque it to 135ft pounds as for the straight four I am unsure I believe its about 115 but don't quote me on it. Either way this is definitely a great product. I would recommend that if you get the corresponding Luk Clutch kit to switch the Luk throw-out bearing with a National throw-out bearing as the Luk throw-out has plastic parts and plastic is a no go for a transmission and the reason to choose National is because they are a seasoned company making very reliable full metal regressed throw-out bearings for years. This product will be good for factory replacement and tranny upgrade

I purchased in June 2024 for my 1994 YJ. My Jeep has gone through several phases and so this is actually my third Luk flywheel to buy. I had a Centerforce high inertia flywheel previously, and the engine ran great with it. I pulled the engine for some work and upon reinstall I went with a Luk again to go back to stock.Got the Jeep back together and finally cranked it up. Started very poorly. Once running it was decent. Continued to sound like it was basicallychoking at startup and never got better no matter what I did.Checked out the reviews here and I saw some negative reviews around the same time frame as when I purchased the one. Spent the afternoon removing the transmission and compared it to an older Luk LFW193 that I forgot I have. Sure enough, the timing marks are off like multiple reviews.What a pain to deal with.Don’t buy this unless you go ahead and have your old one out ahead of time so you can compare. Otherwise you’re doing the job twice and you’ll scratch your head for a while wondering what is wrong before you realize it’s the junk flywheel.

As described. Sturdy, well made. I had a mechanic install it, along with a new clutch kit. The Jeep starts right up every time. No grind, no hesitation.

Used to replace the flywheel on 1993 Jeep Wranger 4.0 5 speed. Fit just like OEM at no where near the price! Only have about 150 miles on it and the clutch kit (also from Luk) so far but it is working great! Highly recommend if your Jeep is your daily driver and occasionally you go 4 wheeling/mudding in the back country.

Well...it's a little weird that the flywheel bolt holes are "keyed" and only installed one way, without any other keying to help you line things up, but you can't blame LuK for that.When my clutch blew, it was either get my existing 2000 Jeep Wrangler 4.0L flywheel honed or buy this new one. Honing was almost as expensive, but was discouraged. So I got this one.Seems to work great. In concert with the [LuK 05-901 Clutch Kit] I purchased, my Jeep drives better than new with no clutch chatter on a cold engine.One item to note...when removing a flywheel, you always should replace the flywheel bolts. I bought the [ARP (146-2801) Flywheel Bolt Kit] which fit my Jeep just fine.Also, you need a torque wrench. But if you are doing this work, you probably already have one.

Flywheel looks like a decent product except that timing cutouts for crank position sensor are wrong and vehicle runs really rough and throws CPS code. it cost me alot of money having the Flywheel replaced twice and by the time my mechanic could get the flywheel replace my return window was over. I conta<cted supplier and was never contacted back so I'm stuck with a Janky flywheel. Definitely will not work on my 1997 Jeep wrangler 4.0

Perfect replacement of the factory flywheel at a very reasonable price. The OEM flywheel is not meant to be machined, so I ordered this with the rest of the clutch parts. Given the reasonable price and the amount of work to replace the clutch, it made good sense. Bolted on perfectly and working exactly as it should so far.

As the headline says it’s works great for my 94 YJ 4.0 Jeep. 100% recommended.UPDATE: 7000+ miles later and no issues with this flywheel. Great product for those looking to purchase.