Waterdrop WD-XT Small Water Pressure Tank, RO Pressure Tank for All WD-X-series Reverse Osmosis System to Connect the Refrigerator, Mini RO Water Tank Fits 𝟯/𝟴" Water Tubing, WD-X8/X12/X16, BPA Free

Added this to my Waterdrop 1200 it was easy to add I purchased a longer piece of pipe approx. 30 ft to connect it to my fridge a s although my fridge is only 12 feet from the unit I needed to route it down into my basement and have enough slack to pull the fridge out if needed. This caused no pressure problems at the fridge for water or ice making.

All the needed pieces are included and the paper instructions were ok; we found a video that was very useful when installing. At first, we bought this add-on because our new refrigerator ice maker (on the other side of the kitchen about 12-15 feet away) was not working but another appliance on the same dedicated filtration line (built in coffee maker) was, so we thought it was a pressure issue. After installing the pressure tank, the ice maker still did not work so we pulled the refrigerator out and the ice maker eventually kicked on...we think we had a kink in the line to the ice maker but not 100% sure as we attempted a bunch of fixes and really don't know what the issue/fix was. It works great now although water from the filtration spout come out fast--enough to splash out of the glass and we wonder if the pressure tank is contributing to this, but it is better than not having ice, so we are leaving it as is for now.

Easy install, works great with my LG refrigerator Ice maker. Love the small footprint.

It works to connect the Waterdrop X12 to my refrigerator. I wish the 1/4" tubing that came with it was a little longer for my setup. I ended up buying additional tubing for it to reach. It increases the water pressure needed for the refrigerator water/ice maker. It also increases the pressure for the X12 faucet. Use this in conjunction with SharkBite 1/4-in OD Push-to-Connect x 1/4-in Compression Female Adapter to make installation easy.

Didn't seem to help much with pressure compared to my previous tank based RO filtration system that supported the same three outlets (faucet, fridge, hotwater), but did not try removing it after installation. The pump kicks in immediately in the RO system as there is not much capacity in this small tank. It likely gives you an illusion of water rushing through early on, but almost immediately teh RO system kicks in.