Nilight Reverse Camera Push Button Switch 12V ON Off Switches with Connector Wire Kit 1.28" x 0.87" Replacement for Toyota Sequoia Highlander Tacoma Tundra 4Runner RAVR Yaris

I bought this product on Dec 2024 I'm still using it the only problem I faced is the brightness of the leds.

Perfect OEM fit. Zero issues.

Installed in an 08 Tundra, the button isn’t quite flush with the panel when not pressed, as pictured (and quite recessed when it is pressed). Was easy enough to hook up to a Nilight wiring harness, and used a fuse tap to hook into the ACC circuit. Wish the wire leads were a little longer, but it worked well enough.The blue lights don’t match the rest of the orange backlights, but I knew that when I bought it, just wish it was an option.Edit: I moved the button to a different spot (other side of the RSCA Off button) and it sits at the correct depth. The pins inside the button for the pigtail bend very easily so limit the number of times you connect them together

So I wanted to use a switch that fit into the factory covered space locations in my 2008 tundra, to get rid of an after market light switch which hung down from under the steering wheel when I purchased the vehicle.This fit in the hole and is functional, the switch came with the connection and long enough pig-tail to hook to the existing after market lighting wires.I will say, while this does work, and light, it does not 100 per cent fit flush... it is sunk in just a little (all the time) not just when turned on. If your OCD is like mine. this may not be the best solution out there..... it is 1000 percent better than a dangling switch under the steering, but it may not be my permanent solution.DrB

The media could not be loaded. The absolute perfect fit for my ditch lights setup! Love this switch. Looks great. Stays lit. Love it! I drive a 2013 Toyota Tundra. Fit is perfect!

Exactly as factory switches in my Toyota Camry. Installed fog lights into my Camry and this switch was wired into the dash. Works great! Now I can control the fog lights with the switch. LED switch is exactly like factory option. Recommend this if you are installing accessory lights into your car.

Doesn't fit 2008 style Highlander. Switch works fine, but it sinks too far into the blank slot in the dash (by the wiper defroster button and dash backlight dimmer switch) so once you turn on the lights you can't turn them off, the button must be hitting the edges of the dash cutout. So if you're buying this for a 2nd gen Highlander, look elsewhere. I taped the back of mine with electrical tape to keep it from locking into the slot for the time being until I find something better that works.I used it with a Nilight kit that used a much larger toggle switch which had no chance of fitting, so I have no idea what switch to get now. You'd figure Toyota wouldn't use 100 different sized switches in their cars to keep it simple but here we are

As you can see in the pictures, it's VERY crooked. Almost as crooked as the space will allow. And it's loose! It's so loose it rattles! And THEY ALL DO! All the Nilight switches do! It's really bad. That switch on the right with the white font? THAT one is freaking solid! It doesn't budge at all. It's also the competing brand.The Nilight switches are going to work. But they look crooked and I hate it. And the font is impossible to read during the day. That other brands white font looks great in the day.I left the review video on the competing brands review. That competing brands switch is top notch btw.