KASTFORCE KF5002 Steel Bending Brake Sheet Metal Bender Metal Folder 28 Inch (730mm) 18 Ga (1.2mm) Capacity

came well packed fully assembled and this unit is heavy build, i like the design and should work well for my needs.

I was skeptical after reading the reviews. It was well packed, no function issues, and does what it says. Only tested on .063 (1/16) aluminum and handled with ease. I like the extra support on the angle iron. It really helps with not flexing and avoid material slip. The only less than great comment is the lift spring could be a little strong (in the pictures)

Before deciding to purchase this "KASTFORCE KF5002 Steel Bending Brake Sheet Metal Bender 28 Inch", I noted in the Amazon reviews that some people had some issues with it. But those issues, IMHO, seemed manageable. My evaluation was that if I was willing to put in a little time and effort to work through a few possible issues, then the end result would be a good sheet metal brake to add to my shop at a price point that I was comfortable with.Like others, my unit arrived with two broken knobs, and an improperly threaded handle. But the unit itself was in good condition. I contacted the seller, KASTFORCE, and Nancy from customer service was very helpful in getting replacement knobs and handles sent to me right away, with no need to hassle with returning the original ones (although it took a couple of weeks for the replacements to arrive). While I would have preferred never having to deal with a problem in the first place, I was happy with this customer service interaction.The brake was mounted to a wooden board, covered in plastic, and then boxed in cardboard. It was also coated in oil to protect the metal from oxidation. Additionally, some of the areas of the tool, such as in and around the threads, bolts, and springs related to the hold-down bar, were a bit gritty. So while I was waiting for the replacement knobs and handles to arrive, I spent some time cleaning and properly lubricating everything, and then applying a coat of T-9 Boeshield for protection.Once cleaned and properly lubricated, and the replacement handles and knobs in place, the tool was ready for use. So far, I've used it to create a replacement part for my outdoor grill. I used it to make multiple bends of different angles in 25" wide, 0.1" thick aluminum. The tool performed well, and I am very happy with the results. It's also just the right size to clamp to my table saw, which provides it with a nice heavy base when in use.I can recommend this tool, as long as you have the right expectations up-front. The knobs and handles can be a problem, but customer support will make it right if you do have a problem. (At least that was my experience.) You should also expect to put in some time and effort cleaning and lubricating the tool before its first use. Once these issues are addressed the brake seems to work well and, in my opinion, is a good value for the money. I only wish I could find a good metal shear for a similar price point.A note about the broken knobs: The problem seems to be a design issue. Since there is no internal stop inside the knob, the knobs can break if they are tightened too firmly and the handle threads are long enough to allow the handle rod to push against the inside far side of the plastic knob. Unfortunately, the factory doesn't seem to have figured this out since mine arrived broken due to this very issue. This problem can be avoided by first threading a nut onto the handle shaft to act as a stop limit so that the knob bottoms out on the nut before breaking. The other way to prevent the problem would be to have better quality control over the handle thread depth, thereby avoiding the problem altogether (a shorter thread acting as a stop limit similar to the added nut).

Muy buena para doblar lamina para sidding

I was hesitant to place my order after reading other reviews talking about missing and broken parts. Since all the competition at similar prices required C-clamps to hold down the strong-back and only used flat plates without the additional angle iron reinforcement, I was willing to make any repairs or purchases.Mine came in perfect condition.My only gripe is that the lift assist springs are weenies. I bought a stronger pair for about 3 bucks and couldn't be happier.I've been practicing with 22 gauge and it bends like there's nothing there. More than enough machine for my needs.

Real happy with this purchase does a real nice job,

THE TOOL IS A REAL WELL MAID AND NOT CHEEP, I WAS PRESENTLY SURPRISED TO SEE THE HIGH QUALITY OF THE TOOL. THE SHIPPING WAS VERY FAST AND WELL PACKED. DON'T WAST YOUR CASH ON ANY OTHER BENDING TOOL ITS THE BEST ONE I HAVE SEEN FOR THE MONEY. WHEN YOU GET ONE YOU WILL BE VERY HAPPY TO SEE THE WELL MAID AND FINISHED TOOL. I AM VERY HAPPY TO HAVE PERCHES-ED THIS TOOL AFTER DOING A LARGE AMOUNT OF RESEARCH ON THE BENDING TOOLS AVAILABLE OUT THERE. ITS BIN MY WEEK FOR GREAT DEALS I PERCHES-ED A TUBING STRAITENING TOOL THAT IS TOP SELF TOOL BUT NOT THE OUT OF THIS WORLD PRICE AND IT WORKS VERY GOOD AND SO WELL MAID OUT OF REAL HIGH GRAD TOOL STEEL NOT CHEEP ALUMINUM LIKE THE REST I HAVE CONSIDERED PERCHING FOR OVER $300.00

I use this to fold thin lexan. It works great.