Kreg 12-Foot Self-Adhesive Measuring Tape - Left to Right Reading Bench Ruler - Stick On Precision Workshop Scale - KMS7724

I used this with my chop saw so I can repeat cuts easily. The it's easy to install, adhesive is great, forgiving enough to move around before you fully set it. The tape itself is metal and feels quality. I checked it against several rulers and tape measures, it is dead on accurate.

Works great for what I needed it for has held up for months so far.

High quality and easy to see. I used it for a replacement tape for my table saw

This measure replaced one on my table saw that was getting illegible from abuse. The Kreg is a quality measure but I wish I had paid more attention to the width. It is about 3/16 narrower than the original measure. I did remove the original before sticking the Kreg in its place. My fence has a plastic magnifier that hovers over the measure and it helps to read the really find print. Accuracy depends, of course, on the placement of this measure, not the measure itself. If you are an amateur wook worker like me, be careful when you stick it down so that the distance between the blade and the fence is accurate (I used a tape measure to calculate the distance; my fence has an adjustable plastic magnifier that can make it accurate.

After finding a 48" top track, I got this to use with my crosscut sled. It is very easy to read with the Kreg magnifiers on the stop. It fits really well in the top track and since it's metal, it won't be as wavy when you stick it on. It seems to have stuck really well and is pretty accurate for my needs. With the 12 feet of length, it's pretty versatile. Just make sure you read the description as they have right to left reading and left to right so if you want to cut on either side of the blade, you will need to buy both.

Yes, worked perfectly

I prepped the surface for adhesive and had no issues with aligning it. I have an old Delta tablesaw and it worked well.

Just finished installing this on a Kreg Top Track for my crosscut sled. I gave the channel in the top track a quick wipe down with isopropyl alcohol to remove any contaminates. The adhesive tape went down with zero problem. The adhesive is strong. I don't anticipate having any issue with it. I'm using the Kreg production stop in this application. I bought a L to R and a R to L tape. Great product! I do have one question solely out of curiosity. In the pic there's a black diamond printed on the tape just past the 19-3/16" mark. Why does this need to be on the tape? I noticed that it's on the L to R and a R to L tapes. Weird.

excellent to stick onto my work bench for quick measurements .

útil, buenisimo y de excelente calidad y muy facil de instalar llego 2 dias antes de lo esperado lo recomiendo ampliamente

Tape is on a solid metal tape rather than plastic on less expensive models. Appears to be accurate over the 40" in my table saw. Adhesive is strong. Backing tape didn't come off in one piece but this was a minor inconvenience. Would definitely recommend.

works as expected

This was a perfect replacement for an older Delta Saw fence. Easy to read and accurate. I used Actone then alcohol to ensure the surface was clean. Only gripe is I should have found a 3/4 wide tape.