Seneca AV ST31 Low Profile Fixed TV Mount for 32"-60" Flat Screen Displays - 12 Degree Tilt - VESA Compliant - Built-in Bubble Level Included

I used this to replace a Sanus Simplicity low-profile wall mount from a well-known retailer headquartered in Kirkland, WA. (Sidebar: don't buy the Sanus, it has plastic safety latches that break.)My install had two receptacles located on the wall behind the TV; one was a clockbox two plug power outlet, the other a wallplate with HDMI and Ethernet ports. With TV mounts that have a rectangular anchoring bracket, you'll need to make sure the bracket fits around the receptacles, AND can be mounted onto studs, AND be centered enough to mount the TV. (This is what undid my 1st replacement, the VideoSecu MF608B. Quality mount, just didn't work for me.)Enter the "bar-style" anchor bracket mounts, of which this is one. Going back to the Sanus, "low profile" seems like a good idea except that it basically makes it impossible to access any port in the back of the TV or on the lower 3rd of the wall that the TV covers. This one is still plenty low-profile, but there's enough room so that mounted TV doesn't squash all the connectors.One unmentioned benefit is that the mounting brackets are pre-assembled; that cut down the installation time considerably. As others have mentioned, just skip the built-in leveling device. It's not nearly accurate enough. (Nice idea, bad execution.) The other mounts I used did not come with protective washers for between the brackets and the TV; this one did. My TV (55" Samsung) was already a little scratched up because of the prior mount, and even though you can't see it, I appreciated it.Construction is all metal. Got to love that. The release pulls are made of flat plastic that resembles zip-ties. They can be trimmed of excess length, but they are (rightly) difficult to adjust, so you'll need needlenose pliers (to adjust) and your trusty diagonal pliers to cut.I love it. Haven't had adjustment problems, but my TV is up high, so I wanted the max tilt.

A very well constructed and aesthetically pleasing product at a very reasonable price point. I was able to hang my 47” flat screen up within literally minutes. I’m not going to ding it one star because my only fault with the product was something I could and should have avoided, but got lazy: the leveling ball on this product must have been mounted incorrectly. After I mounted into the wall, I double checked with my professional level and found that it was almost 5 degrees off horizontal. Had to withdraw screws and do it again, leaving some minor wall damage. No problem since the tv covers up the work area. Still, that was a bummer. I should not have just relied on the built in level, in retrospect. Hope that comment saves someone a set of holes in their wall.As far as the product goes in the utility range, it is very well constructed. Nice powder coat finish with well made end caps. The brackets secure onto the rail but still allow for horizontal sliding. Very sturdy construction and I am confident that my 40 lb television is secure on it. Do check your VESA size to make sure it will fit your screen. Comes with a truckload of screws and washers that will fit most televisions. (I ended up returning four screws to a home supply store which I bought in anticipation of this bracket not coming with screws at this price point.) This is way superior to other products I found for three or even four times the price.Dollar for quality, I shopped around a lot before I got this one and I am completely satisfied.

As other have stated there's no level built in, but I had one, so it wasn't a big deal (unless you don't already have one). They tell you to drill pilot holes, but do not tell you the size. Since the lag bolts are 1/4" I used a 11/64" bit and it worked fine. Also, just start with one screw at the top and use a level to mark where the second top bolt will go. I used my cigar poker and hammer to find the stud by finding one side, measuring 1.5" and finding the other side. 3/4" is the center.The bracket safety locks didn't lock by themselves after placing the TV on the mount. I had to use a screwdriver to trip them. Other wise pretty happy with it so far using about a 20lb 43" TV. Also mounted my power strip on bracket using 3M hangers.

It's Ok, tends to tilt out on its own a little bit, and yes I tightened the side screws wicked tight - Still tends to move on its own over a month a few mm. Maybe it's just me. Also it needed 2 Holes drilled in it because it didn't line up with the TV it was bought for, BUT!!! That seems to be a mistake of the seller on here listing this mount with the TV I bought. One really nice thing about the part that hooks to the wall, is its one big slab of metal. I have read others that say the wall mount is in 2 parts to make the boxing and shipping less money. Not This One! Big and Sturdy one peice all the way across. I used this with a Seiki 50" LED TV, and it's Great.

Very easy to install and the back panel is sturdy. The TV mounts were a good fit, and it mounts fairly easily. Though there are mostly upsides to the product, I would have like for the TV mounts to be completely parallel to the wall, but they aren't. Although you can lock the mounts to keep them from opening (to angle the TV downward), no matter how tight I screw the locks in, the mounts open an inch wide and angles the TV down.TV is a Sony XBR49X830C 49-Inch, which is well within the size specification for the product.

This is a solid TV mount and works as advertised. My only complaint (and the reason I gave 4 stars instead of 5) is I've ordered 3 of them and none of them came with the "Built-in Bubble Level Included" that it's advertised with. It wasn't a big deal for me since I have a level, but if you're going to advertise a product and say something comes with it then it's probably a good idea to include it.

It said in the description that it should come with a level but it didn't.Delivery was Great, came on time with Amazon prime.Easy to install but I had place extra washers on the bottom screws when attaching it to the wall (otherwise the TV would not have latched on it properly)Nice that it came with multiple screws sizes.Great product for the money.

just as advertised. Fits and works perfectly

Very happy with seller. Had to ship back original as during shipping was damaged. Got the second one fast and it is great. Thank you.

This is an excellent product. Its so flush against the wall you can barely notice the bracket is even there.

Great value for a quality tv stand. Comes with all hardware and tools required to install any tv