PASOWReplacement Microphones Mic Cable Cord Wire for Yaesu MH-36 MH-36A6J MH-36B6JS MH42 MH-42B6J MH-42C6J MH-48 MH-48A6JA MH-48A6J FT-1500M FT-2800M FT-7100M FT-7800 FT-8800 FT-8900 FT-8900R

I have two Yaesu FT-8900 radios that I purchased back in 2006. After close to 20 years of hard mobile use the mic cords on both radios were rotting at both ends. I replaced both cords with the Pasow replacement cables and they are back in business. Installation took less than five minutes for each radio and I was good to go. Solid connectors at both ends of the cord and the coiled cable is just a bit thicker and seems at least as good as the original cables. Time will tell of course but the price is right and they work perfectly with no sign of RF feedback or any other indication of quality issues. I would recommend these without any hesitation.

Installed in minutes, correct pin out, works great. I seems a tad longer that the original which is good!

After many years of use the mic cord for my FT-100d failed as the rig has been discontinued for more than 20 years I was afraid i wouldn't be able to find a replacement. This cable is a perfect replacement. It was an exact fit and I couldn't tell the difference between it and an OEM part. Replacing the cable was simple taking about 10 minutes. This is a great value costing much less than buying a new mic.

The jacket on the MH-48 microphone cord for my Yaesu FT-8900 started to split causing the multi-conductor wires to be exposed. Not wanting to take the chance of the wires rubbing through the connectors, I decided to finally search for a replacement. The microphone itself functions normally, so I searched for just the cord and found this replacement. This microphone cord arrived very quickly and it only took a few minutes to open the mic housing and replace the cord. The only difference I could see between the original cord and this one is the length of the wires between the rubber grommet and the connector. The wires are quite a bit longer than the original, but there is enough space inside the mic housing to accomodate the extra wiring by simply folding the wires over. Plugged the mic into the radio and it works perfectly. This product is a great option for those that only need to replace the microphone cord.

Worked fine to replace the original cable, quality seems OK. Shorter and stiffer than original Yaesu cable.

I bought two to replace mics on my Yaesu FTM-100D radios which are over 8 years old. Installation was a breeze and the mics work just fine. Wish I had bought them sooner.

I you have an old Royal scale and the connection wire is falling apart this 6 wire will work to the 4 wire connector.

Easy to install. Perfect match.